GOMACO’s texture/cure machine, the T/C-5600, features four crawler tracks, the exclusive G+ control system, and widths up to 56 ft. (17 m). The all new four-track design with 90 degree turn capability allows easy width changes and easy transport, while G+ provides electronic-over-hydraulic steering and grade control for ultimate accuracy.

The magic behind the easy width changes is the T/C-5600’s new walking end car with cure tank. Frame sections can be added or removed by turning the machine’s tracks 90 degrees and walking the end car with attached cure tank to the required width. Frame inserts are available in 4 ft. (1.2 m), 8 ft. (2.4 m), and 12 ft. (3.7 m) lengths. The frame design has the structural integrity to go up to 56 feet (17 m) wide.

The new T/C-5600 offers tining depth accuracy with the all new GOMACO tracer texture control. A sonic sensor traces the slab with the transverse travel of the tining broom. The tining depth is controlled by hydraulic height adjustment on the broom carriage. The two working together provide accurate tining depth, eliminate rail adjustments and also eliminate the need for a power transition adjustor (PTA). Tracer texture control also works with transition adjustments required for longitudinal tining.

With G+ Connect on-board, the new T/C-5600 can operate on stringline for steering and grade control or use other control methods available from the GOMACO sensor library, or 3D stringless control. G+ control allows easy changing of travel modes, switching from operational to transport.

The T/C-5600 was designed to be easy to transport. The tracks turn 90 degrees for easy loading onto a low-boy trailer and the spray bar and work bridge assembly hydraulically folds up for a transport width of 9.7 ft. (3 m).

For more information, visit www.gomaco.com.