Create a CEG Account  /  CEG Login



Looking Back: Building the Cannonsville Dam, Reservoir

Building the dam required 2.75 million cu. yds. of earth obtained from a nearby borrow pit.

October 18, 2016 - Northeast Edition
Edgar A. Browning

The Lane Construction Company of Meriden, Conn., built the Cannonsville Dam and Reservoir under an $11.7 million contract with the New York City Board of Water Supply. The project was completed in 1964. The dam and reservoir is located on the west branch of the Delaware River within the towns of Tompkins and Deposit, Delaware County, N.Y. It has a capacity of 95.7 billion gallons. The dam was constructed of a rolled earth embankment 175 ft. (53 m) high and 850 ft. wide at the base. It required 2.75 million cu. yds. (2.1 million cu m) of earth obtained from a nearby borrow pit. The material was loaded with four Kolman belt loaders charged with bulldozers.

Lane Construction photo
One of the four Kolman belt loaders is seen in this circa 1962 photo. The oversize material not suitable for use in the dam is being scalped by a screen. The haul trucks are Euclid R-27 end dumps.
Lane Construction photo One of the four Kolman belt loaders is seen in this circa 1962 photo. The oversize material not suitable for use in the dam is being scalped by a screen. The haul trucks are Euclid R-27 end dumps.  

Lane Construction photo
A fleet of idle Lane Construction Caterpillar DW-21 scrapers are visible. Beyond is the 748 ft. (228 m) long Trout Creek Road Bridge. The bridge and the relocation of Trout Creek Road were built under a separate $2.4 million contract between Lane and the NY Department of Public Works.
Lane Construction photo A fleet of idle Lane Construction Caterpillar DW-21 scrapers are visible. Beyond is the 748 ft. (228 m) long Trout Creek Road Bridge. The bridge and the relocation of Trout Creek Road were built under a separate $2.4 million contract between Lane and the NY Department of Public Works.  

Lane Construction photo
A Lane Construction P&H 1055 shovel loads a Euclid R-27 end dump with blasted rock. A Caterpillar D8 tractor with a cable bulldozer is keeping the cut floor dressed. The rock is being excavated to construct the dam weir or spillway.
Lane Construction photo A Lane Construction P&H 1055 shovel loads a Euclid R-27 end dump with blasted rock. A Caterpillar D8 tractor with a cable bulldozer is keeping the cut floor dressed. The rock is being excavated to construct the dam weir or spillway.  

Lane Construction photo.
The dam weir is under construction here. The truck crane is a Michigan owned by Lane Construction.
Lane Construction photo. The dam weir is under construction here. The truck crane is a Michigan owned by Lane Construction.  


Today's top stories

New SR 141 Alignment Promises Smoother Travel Through Middle Tennessee

Webber–United JV Advances $620M I-16/I-75 Interchange

Thompson Tractor Hosts Companywide Used Equipment Sale

Georgia Power Begins Construction of Battery Storage System

Werk-Brau Names Gold Coast JCB as South Florida Dealer

BOMAG Names Mid South Machinery Full Line Dealer for State of Mississippi

Louisiana Breaks Ground On $2.3B I-10 Calcasieu River Bridge

James River Equipment Named Newest Trimble Technology Outlet, Serving Customers in Mid-Atlantic


 





×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.95234 \\ -75.16379 \\ Philadelphia \\ PA \\ US \\ 19019