The RX-400’s 4-ft. (1.2 m) cold planer design allows contractors to cut as narrow as 26 in. (66 cm) with improved evacuation of material from the cutter housing. Material evacuation is efficient enough to allow cutting depth up to 12.5 in. (32 cm), even in clog-prone, loose material, according to the manufacturer.

The RX-400 conveyor and cutter housing design allows the 26-in. wide drum section “visibility” of the conveyor for better material flow. The conveyor and cutter housing design of the RX-400 solves the significant tooth and tooth holder wear problem often encountered with other designs. These problems result from poor material evacuation in the cutter housing and the fact that too much milled up material gets churned in the housing, wearing out components.

Moreover, better material flow through the cutter housing makes operating the machine much more efficient, according to the manufacturer.

The RX-400 cold planer features a 325-hp (242 kW) Caterpillar C9 ACERT engine, and a maximum operating speed of 172 ft. per minute (52 mpm).

For more information, call 423/265-0600 or visit www.roadtec.com.