Create a CEG Account  /  CEG Login
☰
Equipmentdown-arrow
  • Parts Search
  • Equipment Specs
  • Wanted to Buy
  • CEG Bargains
  • All Equipment List

  • Aerial Lifts
  • Aggregate Equipment
  • Agricultural Equipment
  • Air Compressors
  • Asphalt / Concrete / Paving
  • Asphalt Pavers
  • Attachments
  • Backhoe Loaders
  • Cold Planers / Milling Machines
  • Compact Track Loaders
  • Compaction Equipment
  • Conveyors / Feeders / Stackers
  • Cranes
  • Crawler Carriers
  • Crawler Dozers
  • Crawler Loaders
  • Crushers
  • Drills
  • Dumpers
  • Excavators
  • Forestry Equipment
  • Forklifts
  • Landscaping Equipment
  • Light Towers
  • Material Handlers
  • Mini Excavators
  • Miscellaneous Equipment
  • Motor Graders
  • Off-Highway Trucks
  • Off-Highway Water Trucks
  • On-Road Trucks
  • Pipelayers
  • Power Systems and Generation
  • Pumps
  • Scrapers
  • Screening
  • Skid Steer Loaders
  • Skip Loaders
  • Snow Equipment
  • Straw Blowers / Hydroseeders
  • Sweepers
  • Telehandlers
  • Trailers
  • Trenching / Boring / Cable Plows
  • Utility Vehicles
  • Welders
  • Wheel Dozers
  • Wheel Loaders
    • Newsdown-arrow
    Auctionsdown-arrow
    Companydown-arrow
    Subscribedown-arrow
    Parts
    Buyer's Guides
    Digital Issues
    Videos
    Search
    Equipment ↠ Case ↠ Crawler Dozers ↠ 2011 Case 650L

    2011 Case 650L For Sale in South Mills, NC


    / Save to Watch List

    For Sale: $52,500.00 USD

    Apply for Financing

    Southeastern Equipment Corporation (North Carolina)

    Southeastern Equipment Corporation (North Carolina) Dealer Info
    Southeastern Equipment Corporation (North Carolina) Website
    Click here to email Southeastern Equipment Corporation (North Carolina).


    Contact: Bryan Smith

    Click for Phone Number


    Machine Info:

    Serial Number:CEG-NBDC60009
    Stock Number:03-9266
    Machine Location:SOUTH MILLS, NC

    Description:

    Open canopy, all hydraulic 6-way blade, limb risers, extended wear rotating bushings undercarriage with very good life remaining with 20” pads. Joystick controls. Clean, straight, tight machine. Clean operators station with all controls functioning properly. No known issues

    Machine Details:

    General Specifications
    hours1952
    airconditioningNo
    heaterNo
    idlerspercentremaining70
    padpercentremaining50
    padsize20
    padsizeUnitinch
    rollerspercentremaining60
    ropstypeOpen
    ripperNo
    winchNo
    trackpercentremaining70
    tracktypeSteel
    operatorcontrolsJoystick
    undercarriageremaining70
    screensNo
    sweepsYes
    oscillationYes
    seatmaterialVinyl
    heatedseatNo
    undercarriagetracksystemLong Wear


    From the manufacturer:

    Supplied by HeavyEquipmentData.com →

    Blades
    Blade Capacity 2 cu yd (2 cu m)
    Blade Height 33 in (84 cm)
    Blade Type PAT
    Blade Width 10 ft (3 m)
    Capacities
    Engine oil with filter 3 gal (12 l)
    Dimensions
    Blade depth below ground 21 in (53 cm)
    Blade lift above ground 34 in (85 cm)
    Cast reach 11 in (28 cm)
    Ground Clearance 1 ft (0 m)
    Height - Top of Cab 9 ft (3 m)
    Height - Top of ROPS/FOPS 104 in (264 cm)
    Length of Track on Ground 84 ft (26 m)
    Width Over Tracks 6 ft (2 m)
    Drive System
    Final drive 2 helical gear
    Max drawbar pull 36,082 lbs (16,366 kg)
    Parking brakes Heavy-duty spring-applied
    Electrical System
    Alternator 90 amp
    Battery 12-volt low-maintenance
    Engine
    Displacement 275 cu in (4,502 cu cm)
    Emission Tier Level Tier3
    Engine Model Case 445TA/EG7a
    Fan 20 in(500 mm)Diameter
    Fuel 2 Diesel
    Fuel tank 41 gal (155 l)
    Gross Power 81 hp (60 kw)
    Net Power 74 hp (55 kw)
    Power Measured @ 2,000 rpm
    Pump operating angles - Fore and aft 45 degrees
    Pump operating angles -Side-to-side 45 degrees
    Transmission Type Hydrostatic
    Hydraulic System
    Lift cylinder - Rod diameter 2 in (5 cm)
    Lift cylinder - Stroke 16 in (40 cm)
    Lift cylinder(s) 2
    Lift cylinder-Bore diameter 4 in (9 cm)
    Pump Flow Capacity 21 gpm (79 lpm)
    Pump type Variable Displacement Piston
    Operating Specifications
    center rock guard 340 lbs (154 kg)
    Long track 16,248 lbs (7,370 kg)
    Low ground pressure 17,547 lbs (7,959 kg)
    Operating Weight 17,547 lbs (7,959 kg)
    Sweeps 110 lbs (50 kg)
    Winch 1,001 lbs (454 kg)
    Performance
    Pump Flow 20 gpm (77 lpm)
    Standard Blade
    Blade Angle (both directions) 25 degrees
    Transmission
    Max Speed - Forward 6 mph (9 kph)
    Max Speed - Reverse 6 mph (9 kph)
    Undercarriage
    Number of bottom rollers per side 6
    Number of Upper Rollers 1
    Width of Shoes 27 in (69 cm)

    Dealer Contact Info:

    Southeastern Equipment Corporation (North Carolina)

    Southeastern Equipment Corporation (North Carolina) Dealer Info
    Southeastern Equipment Corporation (North Carolina) Website
    Email Southeastern Equipment Corporation (North Carolina).


    Contact: Bryan Smith

    Click for Phone Number


    veritread button



    Log In to Your CEG Account







    ×

    Stay Ahead of the Market

    Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



    39.95234 \\ -75.16379 \\ Philadelphia \\ PA \\ US \\ 19019