Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $59,000.00 USD
Apply for Financing| Serial Number: | CAT0279DLGTL05510 |
| Stock Number: | 2260 |
| Machine Location: | BARDSTOWN, KY |
Supplied by HeavyEquipmentData.com →
| Air Conditioning System | |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
| Cab | |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
| Clearance at Max Lift and Dump | 8 ft (3 m) |
| Clearance at Maximum Lift and Dump | 98 in (248 cm) |
| Departure Angle | 32 degrees |
| Dump angle | 39 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height - Top of Cab | 7 ft (2 m) |
| Length - Track on Ground | 64 in (163 cm) |
| Length - with Bucket | 12 ft (4 m) |
| Length - With Bucket on Ground | 146 in (371 cm) |
| Maximum Dump Angle | 39 degrees |
| Maximum Overall Height | 160 in (405 cm) |
| Maximum Reach - With Arms Parallel to Ground | 54 in (137 cm) |
| Overall Height | 13 ft (4 m) |
| Overall Length - Track | 84 in (213 cm) |
| Overall Track Length | 7 ft (2 m) |
| Rack Back Angle - Maximum Height | 84 degrees |
| Reach - Maximum Lift/Dump | 23 in (57 cm) |
| Reach at Max Lift and Dump | 2 ft (1 m) |
| Turning Radius from Center - Bucket | 89 in (226 cm) |
| Turning Radius from Center - Coupler | 56 in (141 cm) |
| Vehicle Width (400 mm/15.7 in tracks) | 76 in (193 cm) |
| Vehicle Width (450 mm/17.7 in tracks) | 78 in (198 cm) |
| Width Over Tracks | 6 ft (2 m) |
| Engine | |
| Bore | 4 in (9 cm) |
| Displacement | 203 cu in (3,327 cu cm) |
| Engine Make | DIT |
| Engine Model | Cat C3.3B DIT (turbo) |
| Gross Power | 74 hp (55 kw) |
| Gross Power - SAE J1995 | 74 hp (55 kw) |
| Net Power | 73 hp (54 kw) |
| Net Power - ISO 9249 | 74 hp (55 kw) |
| Net Power - SAE 1349 | 73 hp (54 kw) |
| Peak Torque | 196 lbs ft (265 nm) |
| Peak Torque - 1,500 rpm - SAE J1995 | 195 ft (59 m) |
| Stroke | 5 in (12 cm) |
| Torque Measured @ | 1,500 rpm |
| General Specifications | |
| category (Since 2020) | COMPACT TRACK LOADERS |
| ENGINE POWER HP (KW) (Since 2016) | 73 (54) |
| MODEL (Since 2016) | 279D |
| OPERATING LOAD LBS. (KG) (Since 2016) | 2,935 (1,331) |
| OPERATING WIDTH IN. (CM) (Since 2016) | 76 (193) / 78 (198) |
| OPERATING WIDTH IN. (CM) (Since 2019) | 78 (198) |
| RATED OPERATING CAPACITY LBS. (KG) (35%) (Since 2020) | 2,055 (932) |
| RATED OPERATING CAPACITY LBS. (KG) (50%) (Since 2019) | 2,055 (932) |
| Hydraulic System | |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 hp (57 kw) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gpm (121 lpm) |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 hp (33 kw) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335 psi |
| Pump Flow | 23 gpm (86 lpm) |
| Relief Valve Pressure | 3,336 psi |
| Loader | |
| Breakout Force | 7,284 lbs (3,304 kg) |
| Operating Load Rating | 2,055 lbs (932 kg) |
| Operating Width | 76 in (193 cm) |
| Tipping Load | 5,871 lbs (2,663 kg) |
| Noise Level | |
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 103 dB(A) |
| Operating Specifications | |
| Alternator Supplied Amperage | 80 amps |
| Breakout Force - Tilt Cylinder | 7,285 lbs (3,304 kg) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Fuel Capacity | 25 gal (94 l) |
| Ground Contact Area - With 400 mm/15.7 in Track | 2,015 cu in (33,020 cu cm) |
| Ground Contact Area - With 450 mm/17.7 in Track | 2,272 cu in (37,231 cu cm) |
| Ground Pressure - With 400 mm/15.7 in Track | 5 psi |
| Ground Pressure - With 450 mm/17.7 in Track | 4 psi |
| Hydraulic System Fluid Capacity | 14 gal (52 l) |
| Max Speed - high range | 7 mph (11 kph) |
| Max Speed - low range | 5 mph (7 kph) |
| Operating Voltage | 12 volts |
| Operating Weight | 9,892 lbs (4,487 kg) |
| Rated Operating Capacities - 35% Tipping Load | 2,055 lbs (932 kg) |
| Rated Operating Capacities - 50% Tipping Load | 2,935 lbs (1,331 kg) |
| Rated Operating Capacity with Optional Counterweight | 3,185 lbs (1,445 kg) |
| Tipping Load | 5,870 lbs (2,663 kg) |
| Power Train | |
| Travel Speed - Forward or Reverse - One Speed | 5 mph (7 kph) |
| Travel Speed - Forward or Reverse - Two Speed | 7 mph (11 kph) |
| Service Refill Capacities | |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 25 gal (94 l) |
| Hydraulic System | 14 gal (52 l) |
| Hydraulic Tank | 10 gal (39 l) |
| Undercarriage | |
| Ground Contact Area | 2,015 cu in (33,022 cu cm) |
| Ground Pressure | 5 psi |
| Length of Track on Ground | 5 ft (2 m) |
| Weights | |
| Operating Weight | 9,893 lbs (4,487 kg) |