Equipment ↠ Caterpillar ↠ Crawler Dozers ↠ Caterpillar D6N

Caterpillar D6N For Sale in Tukwila, WA

Name: Caterpillar D6N
Brand: Caterpillar
SKU: 87534829
Price: 135000 USD
Availability: InStock

❮

❯

/ Save to Watch List

For Sale: $135,000.00 USD

Apply for Financing

NC Machinery

NC Machinery Dealer Info

NC Machinery Website

Click here to email NC Machinery.

Click for Phone Number

Machine Info:

Hours:	7498
Serial Number:	LJR00636
Machine Location:	TUKWILA, WA
More Information:	https://catused.com/cu/10235176

Description:

AS IS, AS EQUIPPED, CAT D6N TRACK TYPE TRACTOR, Online Owner's Manual

Machine Details:

GENERAL CONDITION
Machine Starts and is Operable	Yes
S.O.S. (All Compartments)	No
GENERAL APPEARANCE
Cleaning Required	Yes
SAFETY ITEMS
ROPS Certification Plate	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Safety Decals Legible	Full
ENGINE
Apparent Other Engine Damage	No
Blow By	No
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Alternator	Good
Batteries / Cables	Good
Starter	Good
Wiring	Good
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Steering Linkage	Good
Steering Operating Condition	Good
HYDRAULICS
Leaks - HYDRAULICS	No
BLADE
Cutting Edge & Bits	Good
Face / Moldboard	Good
Knuckle	Good
Pins	Good
Push Arm	Good
Single Tree	Good
Spill Rack	Good
Tilt Arms	Good
Tower	Good
Trunnions	Good
RIPPER / GRAPPLE / WINCH
Beam / Frame	Good
Brackets / Studs	Good
Lines / Fittings - RIPPER / GRAPPLE / WINCH	Good
Pins & Bushings	Good
Ripper Lift Cylinder	Good
Shanks / Get	Good
UNDERCARRIAGE
Pins & Bushings Turned?	No
FINAL DRIVES
Housings, Left	Good
Housings, Right	Good
Planetaries / Differential, Left	Good
Planetaries / Differential, Right	Good
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Pins & Bushings Turned?	Machine started well cold, and appeared to operate well during warm up. Right cab door was stuck in open position. Throttle switch would only lower idle with park brake off, when park brake engaged, throttle would increase.
Pins & Bushings Turned?	Front grab handles dented/missing. Ripper. Undercarriage approx. 60% remaining overall.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The latest in the line of Cat D6N dozers combines well-known versatility with a range of technology features to give you more job site productivity than ever before. A new transmission with lock-up clutch torque converter delivers ease of operation, increased net power, plus a 10-15 percent improvement in fuel efficiency. The D6N has the weight and horsepower you want for dozing applications and the balance and stability you need for finish grading – all in one easyto-transport machine.

Dimensions
Ground Clearance	1 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Length of Track on Ground	8 ft (3 m)
Width Over Tracks	8 ft (3 m)
Engine
Bore	4 in (10 cm)
Displacement	433 cu in (7,096 cu cm)
Engine Model	Cat C7.1 ACERT
Flywheel Power	166 hp (124 kw)
Net Power	145 hp (108 kw)
Stroke	5 in (13 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow	34 gpm (127 lpm)
Tilt Cylinder Flow	24 gpm (90 lpm)
Operating Specifications
Cooling System Fluid Capacity	11 gal (41 l)
Final Drives Fluid Capacity	2 gal (7 l)
Fuel Capacity	79 gal (299 l)
Hydraulic Fluid Capacity	8 gal (30 l)
Operating Weight	34,361 lbs (15,586 kg)
Ripper
Beam Cross Section	216 mm 254 mm (8.5 in 10.0 in)
Number of Pockets	3
Overall Beam Width	87 in (220 cm)
Ripper Type	Fixed Parallelogram
Service Refill Capacities
Cooling System	11 gal (40 l)
DEF Tank	5 gal (19 l)
Engine Crankcase	5 gal (17 l)
Final Drive - Each	2 gal (7 l)
Fuel Tank	73 gal (277 l)
Hydraulic Tank	8 gal (30 l)
Power Train	42 gal (160 l)
Standard Blade
Capacity	4 cu yd (3 cu m)
Height	47 in (120 cm)
Width	11 ft (3 m)
Standards
Brakes	Brakes meet the standard ISO 10265:2008.
FOPS	FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS	ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Transmission
1 Forward	2 mph (3 kph)
1 Reverse	3 mph (4 kph)
2 Forward	4 mph (6 kph)
2 Reverse	4 mph (7 kph)
3 Forward	6 mph (10 kph)
3 Reverse	8 mph (12 kph)
Max Speed - Forward	6 mph (10 kph)
Max Speed - Reverse	7 mph (12 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Undercarriage
Ground Contact Area	4,822 cu in (79,019 cu cm)
Ground Pressure	7 psi
Number of Shoes per Side	40
Number of Track Rollers per Side	7
Track Gauge	6 ft (2 m)
Winch
Drum Capacity - 22 mm (0.88 in)	289 ft (88 m)
Drum Diameter	10 in (25 cm)
Drum Width	12 in (32 cm)
Flange Diameter	20 in (50 cm)
Oil Capacity	20 gal (74 l)
Weight	2,814 lbs (1,276 kg)
Winch and Bracket Length	45 in (115 cm)
Winch Case - Width	38 in (98 cm)

Dealer Contact Info:

NC Machinery

NC Machinery Dealer Info

NC Machinery Website

Email NC Machinery.

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon

Caterpillar D6N For Sale in Tukwila, WA

NC Machinery

Machine Info:

Description:

Machine Details:

From the manufacturer:

Dealer Contact Info:

NC Machinery

Log In to Your CEG Account

Stay Ahead of the Market