Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $421,053.00 USD
Apply for Financing| Hours: | 9225 |
| Serial Number: | 2T400275 |
| Machine Location: | HARRISBURG, PA |
| More Information: | https://catused.com/cu/10247791 |
Supplied by HeavyEquipmentData.com →
| Body Capacities | |
| Heaped (SAE 2:1) | 23 cu yd (18 cu m) |
| Struck | 17 cu yd (13 cu m) |
| Tailgate Heaped SAE 2:1 | 25 cu yd (19 cu m) |
| Tailgate Struck | 18 cu yd (14 cu m) |
| Body Hoist | |
| Lower Time | 8 seconds |
| Raise Time | 12 seconds |
| Body Plate | |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness | |
| Base | 1 in (2 cm) |
| Front | 0 in (1 cm) |
| Side | 1 in (1 cm) |
| Dump | |
| Rated Payload | 68,343 lbs (31,000 kg) |
| Engine | |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
| Gross Power - SAE J1995 | 375 hp (280 kw) |
| Net Power - ISO 14396 | 370 hp (276 kw) |
| Net Power - SAE J1349 | 367 hp (274 kw) |
| No Engine De-rating Required Below | 12,500 ft (3,810 m) |
| Peak Engine Torque Gross (SAE J1995) | 1,579 lbs ft (2,141 nm) |
| Peak Engine Torque Net (ISO 14396) | 1,564 lbs ft (2,120 nm) |
| Peak Engine Torque Net (SAE J1349) | 1,564 lbs ft (2,120 nm) |
| Peak Engine Torque Speed | 1,200 rpm |
| Stroke | 6 in (16 cm) |
| Operating Weights | |
| Center Axle - Empty | 9,987 lbs (4,530 kg) |
| Center Axle - Loaded | 37,236 lbs (16,890 kg) |
| Center Axle - Rated Load | 27,249 lbs (12,360 kg) |
| Front Axle - Empty | 32,882 lbs (14,915 kg) |
| Front Axle - Loaded | 40,113 lbs (18,195 kg) |
| Front Axle - Rated Load | 7,231 lbs (3,280 kg) |
| Rear Axle - Empty | 9,436 lbs (4,280 kg) |
| Rear Axle - Loaded | 36,685 lbs (16,640 kg) |
| Rear Axle - Rated Load | 27,249 lbs (12,360 kg) |
| Total - Empty | 52,305 lbs (23,725 kg) |
| Total - Loaded | 114,034 lbs (51,725 kg) |
| Total - Rated Load | 61,729 lbs (28,000 kg) |
| Service Refill Capacities | |
| Cooling System | 22 gal (83 l) |
| DEF Tank | 5 gal (20 l) |
| DEF Tank (ISO 2224-1) | 5 gal (20 l) |
| Fuel Tank | 109 gal (412 l) |
| Hydraulic System | 29 gal (110 l) |
| Output Transfer Gear Box | 6 gal (24 l) |
| Sound Levels | |
| Interior Cab | 76 dB(A) |
| Steering System | |
| Lock to Lock | 4.75 seconds @ 60 rpm |
| Transmission | |
| Forward - 1 | 5 mph (8 kph) |
| Forward - 2 | 9 mph (14 kph) |
| Forward - 3 | 14 mph (23 kph) |
| Forward - 4 | 21 mph (34 kph) |
| Forward - 5 | 29 mph (47 kph) |
| Forward - 6 | 34 mph (55 kph) |
| Reverse - 1 | 6 mph (10 kph) |
| Turning Circle | |
| Turning Dimensions - Aisle Width | 210 in (533 cm) |
| Turning Dimensions - Clearance Radius | 318 in (808 cm) |
| Turning Dimensions - Inside Radius | 153 in (389 cm) |
| Turning Dimensions - SAE Turning Radius | 294 in (747 cm) |
| Turning Dimensions - Steer Angle - Left/Right | 45 degrees |
| Wheel Base Length | |
| Long Wheel Base | 215 in (547 cm) |
| Standard Wheel Base | 157 in (398 cm) |