Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $29,500.00 USD
Apply for Financing| Hours: | 1319 |
| Serial Number: | BGZ01269 |
| Stock Number: | 18072 |
| Machine Location: | COLLEYVILLE, TX |
Supplied by HeavyEquipmentData.com →
| Air Conditioning System | |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab | |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (19 cm) |
| Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
| Bumper Overhang - Behind Rear Axle | 40 in (102 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 93 in (236 cm) |
| Departure Angle | 26 degrees |
| Ground Clearance | 8 in (20 cm) |
| Height - Top of Cab | 7 ft (2 m) |
| Length - With Bucket on Ground | 137 in (349 cm) |
| Length - Without Bucket | 109 in (277 cm) |
| Length w/o Bucket | 9 ft (3 m) |
| Length with Bucket | 12 ft (4 m) |
| Maximum Dump Angle | 48 degrees |
| Maximum Overall Height | 157 in (398 cm) |
| Rack Back Angle - Maximum Height | 91 degrees |
| Reach - Maximum Lift/Dump | 16 in (41 cm) |
| Reach at Max Lift and Dump | 16 in (41 cm) |
| Turn Radius from Center - Bucket | 83 in (211 cm) |
| Turn Radius from Center - Coupler | 52 in (132 cm) |
| Turn Radius from Center - Machine Rear | 65 in (164 cm) |
| Turning Radius from Center - inc bucket | 85 in (217 cm) |
| Vehicle Width over Tires | 66 in (168 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
| Engine | |
| Bore | 4 in (9 cm) |
| Displacement | 203 cu in (3,327 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C3.3B DIT (turbo) |
| Gross Power | 74 hp (55 kw) |
| Gross Power - SAE J1995 | 74 hp (55 kw) |
| Net Flywheel Power | 73 hp (55 kw) |
| Net Power - SAE 1349 | 73 hp (55 kw) |
| Stroke | 5 in (12 cm) |
| General Specifications | |
| category (Since 2020) | SKID STEERS |
| ENGINE POWER HP (KW) (Since 2016) | 73 (54) |
| ENGINE POWER HP (KW) (Since 2019) | 66 (49) |
| MODEL (Since 2016) | 236D |
| OPERATING LOAD LBS. (KG) (Since 2016) | 1,800 (817) |
| OPERATING WIDTH IN. (CM) (Since 2016) | 66 (168) |
| RATED OPERATING CAPACITY LBS. (KG) (50%) (Since 2019) | 1,800 (817) |
| Hydraulic System | |
| Pump Flow Capacity | 20 gpm (76 lpm) |
| Relief Valve Pressure | 3,335 psi |
| Loader | |
| Breakout Force | 5,074 psi |
| Operating Load Rating | 1,800 lbs (816 kg) |
| Operating Width | 66 in (168 cm) |
| Tipping Angle | 3,600 degrees |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 5,074 lbs (2,302 kg) |
| Chain Box Fluid Capacity - each side | 2 gal (9 l) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Fuel Capacity | 28 gal (105 l) |
| Hydraulic System Fluid Capacity | 13 gal (50 l) |
| Max Speed | 11 mph (17 kph) |
| Operating Speed | 7 mph (11 kph) |
| Operational Weight | 6,559 lbs (2,975 kg) |
| Rated Operating Capacity | 1,800 lbs (816 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,000 lbs (907 kg) |
| Tipping Load | 3,600 lbs (1,633 kg) |
| Service Refill Capacities | |
| Chain Box - Each Side | 2 gal (9 l) |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 28 gal (105 l) |
| Hydraulic System | 13 gal (50 l) |
| Hydraulic Tank | 10 gal (39 l) |
| Weights | |
| Operating Weight | 6,559 lbs (2,975 kg) |