Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ 2015 Caterpillar 930K

2015 Caterpillar 930K For Sale in South Mills, NC

Name: 2015 Caterpillar 930K
Brand: Caterpillar
SKU: 82121628
Price: 79500 USD
Availability: InStock

❮

❯

/ Save to Watch List

For Sale: $79,500.00 USD

Apply for Financing

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Machine Info:

Serial Number:	CEG-CAT0930KERHN04369
Stock Number:	13-9136
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat and cold air conditioning. Hydraulic quick coupler with a Cat light materials bucket. Very good 20.525 tires. No leaks, center joint and steering tight, good brakes. Single lever control for hydraulic functions and transmission. Original factory paint with no damage. Very clean inside the cab. Starts easily, runs, operates properly. No known issues.

Machine Details:

General Specifications
hours	9213
airconditioning	Yes
heater	Yes
tiretype	Radial
ropstype	Enclosed
quickattach	Yes
accondition	Good
drive	4WD
fronttirepercentremaining	80
reartirepercentremaining	80
scale	No
turbo	Yes
operatorcontrols	Joystick
parallellift	No
coupler	Yes
highlift	No
telescoping	No
bucket	Yes
remotecontrol	No
numfenders	4
camera	Yes
fenders	Yes

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Caterpillar 930K is a wheel loader designed for material handling, loading, stockpiling, and general construction applications. It is part of Caterpillar's K Series and is commonly used in aggregate yards, roadwork, agriculture, and industrial sites. The 930K features a hydrostatic transmission, articulated steering, and a front-end loader configuration for efficient maneuverability and cycle performance. Typical uses include moving soil, gravel, sand, and other bulk materials. The machine is known for its operator-focused cab, visibility, and compatibility with a range of buckets and attachments. The Caterpillar 930K is a mid-size wheel loader built for versatile jobsite productivity.

Bucket
Bucket Capacities	7 cu yd (5 cu m)
Dump Clearance at Max Raise	9 ft (3 m)
Cab
FOPS	SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	13 ft (4 m)
Carry Height	2 ft (0 m)
Centerline of Front Axle to Hitch	5 ft (1 m)
Digging Depth	4 in (10 cm)
Dump Angle at Maximum Lift	49 degrees
Dump Clearance at Maximum Lift - 45 degrees	9 ft (3 m)
Height - Center of Axle	2 ft (1 m)
Height - Top of ROPS/FOPS	11 ft (3 m)
Length - Rear Axle to Bumper	7 ft (2 m)
Overall Height - Bucket Raised	17 ft (5 m)
Overall Length	25 ft (8 m)
Rack Back Angle - Carry	45 degrees
Rack Back Angle - Maximum Lift	54 degrees
Reach at Maximum Lift and 45 degrees Dump	3 ft (1 m)
Wheel Base	10 ft (3 m)
Engine
Bore	4 in (10 cm)
Displacement	402 cu in (6,588 cu cm)
EEC 80/1269	156 hp (116 kw)
Engine Model	C7.1 ACERT
Gross Power	154 hp (115 kw)
Net Power	152 hp (113 kw)
Net Torque	551 lbs ft (747 nm)
Number of Cylinders	6
Rated Net Power	154 hp (115 kw)
Stroke	5 in (13 cm)
Hydraulic System
Dump Time	2 seconds
Lower Time	3 seconds
Pump Flow Capacity	50 gpm (189 lpm)
Raise Time	6 seconds
Relief Valve Setting	3,626 psi
Loader Hydraulic System
Bore (1)	5 in (12 cm)
Bore (2)	6 in (15 cm)
Dump	2 seconds
Hydraulic Cycle Time	9 seconds
Lower, Empty, Float Down	3 seconds
Pump Flow - Implement Pump	50 gpm (189 lpm)
Raise	5 seconds
Stroke (1)	29 in (73 cm)
Stroke (2)	22 in (56 cm)
Total	9 seconds
Operating Specifications
Articulation Angle	40 degrees
Cooling System Fluid Capacity	9 gal (32 l)
Dump Clearance at Full Lift and 45 degrees Dump Angle	9 ft (3 m)
Front Axle/Diff Fluid Capacity	7 gal (26 l)
Fuel Capacity	52 gal (195 l)
Hydraulic System Fluid Capacity	44 gal (165 l)
Operating Weight	28,948 lbs (13,131 kg)
Rated Bucket Capacity	3 - 7 cu yd (2 - 5 cu m)
Reach - Full Lift and 45 degrees Dump	3 ft (1 m)
Rear Axle/Diff Fluid Capacity	7 gal (26 l)
Static Tipping Load - Full Turn	18,444 lbs (8,366 kg)
Tire Size	21
Transmission Fluid Capacity	2 gal (8 l)
Service Refill Capacities
Cooling System	8 gal (30 l)
Crankcase	5 gal (20 l)
Front	7 gal (26 l)
Fuel Tank	52 gal (195 l)
Hydraulic Tank	24 gal (90 l)
Rear	7 gal (25 l)
Transmission	2 gal (8 l)
Steering System
Maximum Working Pressure	3,500 psi
Steering Angle - Each Direction	40 degrees
Steering Articulation	40 degrees
Steering Cylinder, Two, Bore	3 in (7 cm)
Tires
Size	20.5 R25 radial (L-3)
Transmission
2 Forward	8 mph (13 kph)
3 Forward	17 mph (27 kph)
4 Forward	25 mph (40 kph)
Forward - 1	8 mph (13 kph)
Max Speed - Forward	25 mph (40 kph)
Max Speed - Reverse	25 mph (40 kph)
Number of Forward Gears	4
Number of Reverse Gears	4
Reverse - 1	8 mph (13 kph)
Weights
Operating Weight	30,479 lbs (13,825 kg)
Operational Weight	30,479 lbs (13,825 kg)

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon

2015 Caterpillar 930K For Sale in South Mills, NC

Southeastern Equipment Corporation (North Carolina)

Contact: Davis Mellott

Machine Info:

Description:

Machine Details:

From the manufacturer:

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Contact: Davis Mellott

Log In to Your CEG Account

Stay Ahead of the Market