Create a CEG Account  /  CEG Login

Caterpillar 938K FC For Sale in Aurora, CO


/ Save to Watch List

For Sale: $85,000.00 USD

Apply for Financing

Wagner Equipment Co.



Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:12732
Serial Number:SWL04172
Machine Location:AURORA, CO
More Information:https://catused.com/cu/10130185

Description:

12732/06/05/24, 2-REARVIEW MIRRORS,REAR DEFROST, 2015 CATERPILLAR 938K FC LOADER, 938K WHEEL LOADER, AS IS / AS RECEIVED, BATTERY 1000CCA (2-24V), 115AMP, BUCKET-GP, 3.7 CYD, HO, CAB, DELUXE AC,HEAT,DEF,ROPS,, CAMERA, REAR VIEW, CLEAM EMISSIONS, TIER 4 INTERIM, COUNTERWEIGHT, HEAVY 1400KG, CUTTING EDGE, BOLT ON, 4 PIECE, DIFFERENTIAL, OPEN REAR, ENGINE - AR, ENGINE,C6.6, 169HP, TIER 4 I, ENVIRONMENT, STANDARD, EXTERNAL MIRRORS, STD LIFT,Z-BAR, FENDER, STANDARD STEEL & POLY, GUARD, POWERTRAIN, LOWER, HEADLINER, FLOOR MAT, SUN VISOR,, HYD,2V,COUPLER READY,STD LIFT, LIGHTS, AUX, HALOGEN / HALOGEN, LIGHTS,SIGNAL, THROTTLE LOCK, LOAD SENSING,HYD. ENGINE EIS,, Online Owner's Manual , PRODUCT LINK, CELLULAR, PRODUCT LINK, READY, QUICK COUPLER, FUSION, RADIO, READY, RECOVERY HITCH & PIN, Ride Control, SEAT, DELUXE CLOTH,AIR,HEAT, STEERING, STANDARD, TIRES, 20.5R25 VJT L3, BS, TRANSMISSION,PWR SF F4-R3 VSC, TRAVEL ALARM, BEACON, READY,, WASHER/WIPERS FRT/REAR, TOOLBOX, WEATHER, STANDARD, WET

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
ROPS Certification PlateYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Safety Decals Legible15
Safety Decals Legiblebucket bottom worn, left rear brake housing damaged, door latch does not work properly, transmission fluid low, transmission shifts hard
ENGINE
Apparent Other Engine DamageYes
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksYes
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Pre-HeaterGood
WiringGood
TRANSMISSION
Mag Screens CheckedNo
Transmission - NoisyYes
STEERING
Articulate P & BFair
Hand Metering UnitGood
Lines / Fittings - STEERINGFair
PumpsGood
Steering CylinderGood
Steering LinkageGood
Steering Valves / PumpsFair
Steering Wheel Tilt / ExtendGood
ValvesGood
BRAKE
Holds In ParkYes
Leaks - BRAKEYes
HYDRAULICS
Leaks - HYDRAULICSYes
BUCKET
Standard LiftYes
FINAL DRIVES
Leaks - FINAL DRIVESNo
TIRES
Leaks - FINAL DRIVES50
Leaks - FINAL DRIVES20.5r25


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The Caterpillar 938K is a versatile wheel loader designed for construction, agriculture, and material handling applications. Featuring a robust Cat C7.1 engine, it delivers reliable power and fuel efficiency. The 938K offers advanced hydraulic systems for precise control and enhanced productivity. Its spacious, ergonomic cab provides operator comfort and visibility, reducing fatigue during long shifts. Equipped with durable axles and heavy-duty tires, the 938K ensures stability and traction on various terrains. This wheel loader supports multiple attachments, increasing its functionality for loading, lifting, and transporting materials. The Caterpillar 938K combines performance, durability, and operator-focused design for demanding job sites.
Bucket
Bucket Capacities 7 cu yd (5 cu m)
Dump Clearance at Max Raise 9 ft (3 m)
Cab
FOPS SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
ROPS SAE J1040 MAY94 ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift 13 ft (4 m)
Carry Height 2 ft (0 m)
Centerline of Front Axle to Hitch 5 ft (2 m)
Digging Depth 4 in (10 cm)
Dump Angle at Maximum Lift 49 degrees
Dump Clearance at Maximum Lift - 45 degrees 9 ft (3 m)
Height - Center of Axle 2 ft (1 m)
Height - Top of ROPS/FOPS 11 ft (3 m)
Length - Rear Axle to Bumper 6 ft (2 m)
Overall Height - Bucket Raised 17 ft (5 m)
Overall Length 25 ft (8 m)
Rack Back Angle - Carry 45 degrees
Rack Back Angle - Maximum Lift 54 degrees
Reach at Maximum Lift and 45 degrees Dump 4 ft (1 m)
Wheel Base 10 ft (3 m)
Wheel Base Length 10 ft (3 m)
Engine
Bore 4 in (10 cm)
Displacement 402 cu in (6,588 cu cm)
EEC 80/1269 170 hp (127 kw)
Engine Model C7.1 ACERT
Gross Power 175 hp (131 kw)
Net Power 169 hp (126 kw)
Net Torque 591 lbs ft (801 nm)
Number of Cylinders 6
Rated Net Power 169 hp (126 kw)
Stroke 5 in (13 cm)
Torque Measured @ 1,600 rpm
Hydraulic System
Dump Time 2 seconds
Lower Time 3 seconds
Pump Flow Capacity 50 gpm (189 lpm)
Raise Time 6 seconds
Relief Valve Setting 4,061 psi
Loader Hydraulic System
Bore (1) 5 in (12 cm)
Bore (2) 6 in (15 cm)
Dump 2 seconds
Hydraulic Cycle Time 10 seconds
Lower, Empty, Float Down 3 seconds
Pump Flow - Implement Pump 50 gpm (189 lpm)
Raise 6 seconds
Stroke (1) 31 in (79 cm)
Stroke (2) 22 in (56 cm)
Total 10 seconds
Operating Specifications
Articulation Angle 40 degrees
Cooling System Fluid Capacity 9 gal (32 l)
Dump Clearance at Full Lift and 45 degrees Dump Angle 9 ft (3 m)
Front Axle/Diff Fluid Capacity 9 gal (35 l)
Fuel Capacity 52 gal (195 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Weight 34,129 lbs (15,481 kg)
Rated Bucket Capacity 3 - 7 cu yd (3 - 5 cu m)
Reach - Full Lift and 45 degrees Dump 4 ft (1 m)
Rear Axle/Diff Fluid Capacity 9 gal (35 l)
Static Tipping Load - Full Turn 20,997 lbs (9,524 kg)
Tire Size 21
Transmission Fluid Capacity 3 gal (11 l)
Service Refill Capacities
Cooling System 8 gal (30 l)
Crankcase 5 gal (20 l)
Front 9 gal (35 l)
Fuel Tank 52 gal (195 l)
Hydraulic Tank 24 gal (90 l)
Rear 9 gal (35 l)
Transmission 3 gal (11 l)
Steering System
Maximum Working Pressure 3,500 psi
Steering Angle - Each Direction 40 degrees
Steering Articulation 40 degrees
Steering Cylinder, Two, Bore 3 in (8 cm)
Tires
Size 20.5 R25 radial (L-3)
Transmission
2 Forward 8 mph (13 kph)
3 Forward 17 mph (27 kph)
4 Forward 25 mph (40 kph)
Forward - 1 8 mph (13 kph)
Max Speed - Forward 25 mph (40 kph)
Max Speed - Reverse 25 mph (40 kph)
Number of Forward Gears 4
Number of Reverse Gears 4
Reverse - 1 8 mph (13 kph)
Weights
Operating Weight 35,104 lbs (15,923 kg)
Operational Weight 35,104 lbs (15,923 kg)

Dealer Contact Info:

Wagner Equipment Co.



Contact: Equipment Manager

Click for Phone Number


veritread button



Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.95234 \\ -75.16379 \\ Philadelphia \\ PA \\ US \\ 19019