Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-05-13 Click here to place a bid
| Hours: | 14397 |
| Serial Number: | CAT098OKAGTZ00224 |
| Machine Location: | MALTBY, GBR |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Front | Fixed |
| Maximum Single-Wheel Rise and Fall | 22 in (55 cm) |
| Rear | Oscillating ?13 degrees |
| Brakes | |
| Brakes | Meet OSHA SAE J1473 OCT90 and ISO 3450-1985 required standards |
| Bucket | |
| Breakout Force | 61,425 lbs (27,862 kg) |
| Bucket Capacities | 5 - 16 cu yd (4 - 12 cu m) |
| Bucket Capacity - heaped | 6 cu yd (4 cu m) |
| Bucket Capacity - struck | 5 cu yd (4 cu m) |
| Bucket Width | 12 ft (4 m) |
| Dump Clearance at Max Raise | 11 ft (3 m) |
| Cab | |
| ROPS/FOPS | Meets SAE and ISO standards |
| Dimensions | |
| Ground Clearance | 2 ft (0 m) |
| Height - Top of Cab | 12 ft (4 m) |
| Hinge Pin - Max Height | 15 ft (5 m) |
| Length with Bucket on Ground | 31 ft (9 m) |
| Reach at Max Lift and Dump | 5 ft (2 m) |
| Wheelbase | 12 ft (4 m) |
| Width Over Tires | 11 ft (3 m) |
| Engine | |
| Bore | 5 in (13 cm) |
| Displacement | 763 cu in (12,500 cu cm) |
| Engine Model | Cat C13 ACERT |
| Gross Power | 355 hp (265 kw) |
| Maximum Gross Power - ISO 14396 | 402 hp (300 kw) |
| Maximum Net Power - 1,800 rpm - EEC 80/1269 | 369 hp (275 kw) |
| Maximum Net Power - 1,800 rpm - EEC 80/1269 - Metric | 373 hp (278 kw) |
| Net Power | 369 hp (275 kw) |
| Net Power - ISO 9249 | 369 hp (275 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1,800 rpm |
| Stroke | 6 in (16 cm) |
| Hydraulic System | |
| Dump Time | 2 seconds |
| Hydraulic Cycle Time - Dump, at Maximum Raise | 2 seconds |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 3 seconds |
| Hydraulic Cycle Time - Raise from Carry Position | 6 seconds |
| Hydraulic Cycle Time - Total | 11 seconds |
| Implement System - Maximum Operating Pressure | 4,496 psi |
| Implement System - Optional 3rd Function Maximum Flow | 79 gpm (300 lpm) |
| Implement System - Optional 3rd Function Maximum Pressure | 3,000 psi |
| Lower Time | 3 seconds |
| Pump Flow Capacity | 123 gpm (466 lpm) |
| Pump Type | Gear |
| Raise Time | 6 seconds |
| Relief Valve Setting | 3,000 psi |
| Steering System - Pump Type | Piston |
| Operating Specifications | |
| Alternator Supplied Amperage | 80 amps |
| Breakout Force | 53,548 lbs (24,289 kg) |
| Cooling System Fluid Capacity | 22 gal (83 l) |
| Engine Oil Fluid Capacity | 10 gal (38 l) |
| Front Axle/Diff Fluid Capacity | 23 gal (87 l) |
| Fuel Capacity | 127 gal (481 l) |
| Hydraulic System Fluid Capacity | 66 gal (250 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 66,489 lbs (30,159 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 23 gal (87 l) |
| Static Tipping Weight | 50,201 lbs (22,771 kg) |
| Tire Size | 29.5-25 |
| Transmission Fluid Capacity | 16 gal (61 l) |
| Turning Radius | 26 ft (8 m) |
| Service Refill Capacities | |
| Cooling System | 17 gal (63 l) |
| Crankcase | 10 gal (37 l) |
| Differential - Final Drives - Front | 22 gal (84 l) |
| Differential - Final Drives - Rear | 22 gal (84 l) |
| Fuel Tank - Standard | 118 gal (447 l) |
| Hydraulic Tank | 45 gal (170 l) |
| Transmission | 17 gal (66 l) |
| Sound | |
| Standards | Standards |
| Tires | |
| Note (1) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (2) | Other special tires are available on request. |
| Note (3) | In certain applications the loader's productive capabilities might exceed the tires' tonnes-km/h (ton-) capabilities. |
| Tires | Choices |
| Transmission | |
| Max Speed - Forward | 23 mph (36 kph) |
| Max Speed - Reverse | 26 mph (42 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Transmission Type | Powershift |
| Weights | |
| Operating Weight | 68,862 lbs (31,235 kg) |