| Axle and Final Drive |
|
Drive System |
Four-wheel drive system |
|
Final Drives |
Heavy-duty planetary mounted inboard |
|
Front |
Fixed to the front frame |
|
Front & rear axle |
Semi-floating |
|
Oscillation angle |
Total 20 degrees (+10 -10) |
|
Rear |
Trunnion support |
|
Reduction and differential gear |
Two stage reduction with torque proportional differential |
| Brakes |
|
Parking Brake |
Spring applied hydraulically released wet disc type |
|
Service Brakes |
Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit HST (Hydro Static Transmission) system provides additional hydraulic braking capacity |
| Engine |
|
Aftertreatment |
DOC and SCR system |
|
Air Cleaner |
Two element dry type with restriction indicator |
|
Aspiration |
Turbocharger and intercooled |
|
Batteries |
2 x 12 V |
|
Bore and Stroke |
3.9 in x 4.7 in (98 mm x 120 mm) |
|
Emission |
Complies with EU stage IV and US EPA Tier 4 Final |
|
Maximum rated power ISO 14396, gross |
101 (74 kW) at 2000 min (rpm) |
|
Maximum rated power ISO 9249, net |
96 (71 kW) at 2000 min (rpm) |
|
Maximum Torgue |
400 NM at 1600 min (rpm) |
|
No. of cylinders |
4 |
|
Piston Displacement |
221 in (561 cm)
|
|
Type |
4-cycle water-cooled direct injection |
| General Specifications |
|
Bucket Capacity (Since 2019)
|
2 (1.5) |
|
Engine Model (Since 2020)
|
TCD36 |
|
Engine Model (2021)
|
TCD36 |
|
Engine Model (Since 2022)
|
TCD3.6L4F |
|
Engine Model (2023)
|
TCD3.6L4F |
|
Engine Model (2024)
|
TCD3.6L4F |
|
Engine Model (2025)
|
TCD3.6L4F |
|
Engine Power (Since 2019)
|
101 (74) |
|
Engine Power (Since 2020)
|
96 (72) |
|
Engine Power (2021)
|
96 (72) |
|
Engine Power (Since 2022)
|
96 (71) |
|
Engine Power (2023)
|
96 (71) |
|
Engine Power (2024)
|
96 (71) |
|
Engine Power Net hp (kW) (Since 2025)
|
96 (71) |
|
Engine type (Since 2019)
|
DEUTZ |
|
Engine type (Since 2020)
|
Deutz |
|
Engine type (2021)
|
Deutz |
|
Engine type (2022)
|
Deutz |
|
Engine type (2023)
|
Deutz |
|
Engine type (2024)
|
Deutz |
|
Engine type (2025)
|
Deutz |
|
Max Dump Height (Since 2019)
|
8.9 (2.7) |
|
Max Dump Height (Since 2020)
|
8.8 (2.7) |
|
Max Dump Height (2021)
|
8.8 (2.7) |
|
Max Dump Height (Since 2022)
|
8.83 (2.71) |
|
Max Dump Height (Since 2023)
|
8.83 (2.71)*/10 (3.04)** |
|
Max Dump Height (2024)
|
8.83 (2.71)*/10 (3.04)** |
|
Max Dump Height ft. (m) (Since 2025)
|
8.83 (2.71)*/10 (3.04)** |
|
Operating Weight (Since 2019)
|
18,590 (8,430) |
|
Operating Weight (Since 2020)
|
18,585 (8,430) |
|
Operating Weight (2021)
|
18,585 (8,430) |
|
Operating Weight (Since 2022)
|
18,590 (8,430) |
|
Operating Weight (2023)
|
18,590 (8,430) |
|
Operating Weight (2024)
|
18,590 (8,430) |
|
Operating Weight lbs. (kg) (Since 2025)
|
18,590 (8,430) |
| Hydraulic System |
|
Arm Controls |
Four position valve; Raise hold lower float Bucket controls with automatic bucket return to-dig control |
|
Filters |
Full-flow 10 micron return filter in reservoir |
|
HST charging pump |
Gear type 10.4 gal/min (39.2 L/min) at 2000 min (rpm) at 2.5 MPa (25 kgf/cm2) |
|
Hydraulic cycle times - Bucket dump |
2 seconds |
|
Hydraulic cycle times - Lift arm lower |
3 seconds |
|
Hydraulic cycle times - Lift arm raise |
7 seconds |
|
Hydraulic cycle times - Total |
11 seconds |
|
Hydraulic cylinders - No. x Bore x Stroke |
Arm: 2 x 4.1 in x 28.0 in (2 x 105 mm x 710 mm) Bucket: 1 x 4.9 in x 17.5 in (1 x 125 mm x 445 mm) |
|
Hydraulic cylinders Type |
Double acting type |
|
Main pump (Load & steer) |
Gear type 32.0 gal/min (121 L/min) at 2000 min-1 (rpm) at 20.6 MPa (210 kgf/cm2) |
|
Relief pressure setting |
20.6 MPa (210 kgf/cm2) |
|
Transmission charging pump |
Gear type 5.9 gal/min (22 L/min) at 2000 min (rpm) at 1.8 MPa (18 kgf/cm2 |
| Power Train |
|
Cooling Method |
Forced circulation type |
|
Transmission |
Electrical-controlled 1 motor hydrostatic transmission with gear box Gear box: Fixed gear ratio powershift countershaft type |
|
Travel speed Forward/Reverse - 1st |
7 mph (11 kph)
|
|
Travel speed Forward/Reverse - 2nd |
35 mph (56 kph)
|
| Steering System |
|
Cylinders |
Double-acting piston type |
|
No. x Bore x Stroke |
2 x 2.4 in x 15.6 in (2 x 60 mm x 395 mm) |
|
Steering Angle |
Each direction 40 degrees; total 80 degrees |
|
Type |
Articulated frame steering |
