Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $33,000.00 USD
Apply for Financing| Stock Number: | 45332 |
| Machine Location: | MANHEIM, PA |
Supplied by HeavyEquipmentData.com →
| Bucket | |
| Breakout force, curl | 5,699 lbs (2,585 kg) |
| Breakout force, lift | 5,884 lbs (2,669 kg) |
| General Purpose Bucket Heaped | 1 cu yd (0 cu m) |
| General Purpose Bucket Height | 2 ft (1 m) |
| General Purpose Bucket Length | 3 ft (1 m) |
| General Purpose Bucket Weight | 474 lbs (215 kg) |
| General Purpose Bucket Width | 6 ft (2 m) |
| Landscape Bucket Heaped cap | 1 cu yd (1 cu m) |
| Landscape Bucket Height | 2 ft (1 m) |
| Landscape Bucket Length | 3 ft (1 m) |
| Landscape Bucket Weight | 0 cu in (7 cu cm) |
| Landscape Bucket Width | 6 ft (2 m) |
| Multi Purpose Bucket Heaped cap | 1 cu yd (1 cu m) |
| Multi Purpose Bucket Height | 2 ft (1 m) |
| Multi Purpose Bucket Length | 3 ft (1 m) |
| Multi Purpose Bucket Weight | 776 lbs (352 kg) |
| Multi Purpose Bucket Width | 6 ft (2 m) |
| Capacities | |
| Cooling system | 4 gal (16 l) |
| Engine oil w/ filter change | 4 gal (15 l) |
| Fuel Tank | 27 gal (103 l) |
| Hydraulic oil reservoir | 7 gal (26 l) |
| Hydraulic system | 16 gal (60 l) |
| Tipping Load | 6,427 lbs (2,915 kg) |
| Dimensions | |
| Angle of departure | 29 degrees |
| Attachment roll back angle | 30 degrees |
| Dump angle | 42 degrees |
| Dump Height | 8 ft (2 m) |
| Dump reach | 23 in (59 cm) |
| Ground Clearance | 10 in (25 cm) |
| Height to Hinge Pin | 125 in (318 cm) |
| Overall height | 7 ft (2 m) |
| Overall length (L/bucket) | 10 ft (3 m) |
| Overall length (W/bucket) | 12 ft (4 m) |
| Turning Radius | 6 ft (2 m) |
| Turning radius front L/bucket | 5 ft (1 m) |
| Turning radius front W/bucket | 8 ft (2 m) |
| Wheelbase | 7 ft (2 m) |
| Engine | |
| Alternator | 342,000 amps |
| Aspiration | Turbo |
| Battery | 12 - 109 (V - Ah) |
| Displacement | 151 cu in (2,481 cu cm) |
| Engine Model | TCAE - 55 |
| Fuel Type | Diesel |
| Gross horsepower - SAE J1995 | 74 hp (55 kw) |
| Max Torque | 295 lbs ft (400 nm) |
| Number of Cylinders | 4 |
| Starter | 6 hp (4 kw) |
| Loader | |
| Bucket Width | 78 in (198 cm) |
| High flow pump output | 33 gpm (125 lpm) |
| Operating Load Rating | 2,260 lbs (1,025 kg) |
| Operating Width | 78 in (198 cm) |
| Standard hydraulic pump output | 24 gpm (90 lpm) |
| System pressure | 3,335 psi |
| Performance | |
| Curl | 1 seconds |
| Dump | 2 seconds |
| Lift arm path | Radial |
| Lower (power down) | 2 seconds |
| Raise (lifting) | 4 seconds |
| Rated operating load, 35% tip | 2,251 lbs (1,021 kg) |
| Speeds | |
| Single speed | 6 mph (10 kph) |
| Weights | |
| Weight | 10,230 lbs (4,640 kg) |