Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: Call for Price
| Serial Number: | VCEL180HJ00005569 |
| Stock Number: | H07609 |
| Machine Location: | EXTON, PA |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Axle oil front | 12 gal (46 l) |
| Axle oil rear | 15 gal (55 l) |
| Front | Volvo AWB 40B |
| Rear | Volvo AWB 40B |
| Rear axle oscillation | 13 degrees |
| Rear axle oscillation | 15 degrees |
| Bucket | |
| Breakout Force | 53,077 lbs (24,076 kg) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
| Dimensions | |
| Ground Clearance | 2 ft (1 m) |
| Height - Top of Cab | 12 ft (4 m) |
| Height - Top of Cab | 17 ft (5 m) |
| Hinge Pin - Max Height | 15 ft (4 m) |
| Hinge Pin - Max Height | 29 ft (9 m) |
| Length with Bucket on Ground | 30 ft (9 m) |
| Length with Bucket on Ground | 32 ft (10 m) |
| Wheelbase | 2 ft (0 m) |
| Width Over Tires | 10 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
| Drive System | |
| Torque multiplication, stall ratio | 2.09:1 |
| Transmission | Volvo HTL 223 |
| Transport speed, maximum | 24 mph (38 kph) |
| Electrical System | |
| Alternator rating | 2280/80 (W/A) |
| Battery capacity | 2 x 170 Ah |
| Cold cranking capacity | 1000 A |
| Starter motor output | 9 hp (7 kw) |
| Voltage | 24 V |
| Engine | |
| Aspiration | Turbocharged |
| Displacement | 781 cu in (12,802 cu cm) |
| Engine Model | Volvo D13J |
| Gross Power | 330 hp (246 kw) |
| Make | Volvo |
| Net Power | 329 hp (245 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1,400 rpm |
| Torque Measured @ | 1,000 rpm |
| General Specifications | |
| Bucket Capacity (Since 2016) | 3.5 - 12.4 (2.7 - 9.5) |
| Bucket Capacity (Since 2017) | 5.5 - 20.9 (4.2 - 15.9) |
| Bucket Capacity (Since 2020) | 12.9 (9.9) |
| Bucket Capacity (Since 2022) | 7.2 (5.5) |
| Engine Power (Since 2016) | 333 (248) |
| Engine Power (Since 2017) | 329 (245) |
| Engine type (Since 2016) | D13J |
| Engine type (Since 2019) | Volvo D13J |
| Engine type (Since 2020) | Volvo D13J (Tier 4F) |
| Max Dump Height (Since 2016) | 10 (3) |
| Max Dump Height (Since 2017) | 10 (3.0) |
| Max Dump Height (Since 2020) | 10 (3) |
| Max Dump Height (Since 2022) | 9.9 (2.9) |
| Operating Weight (Since 2016) | 61,890 (28,073) |
| Operating Weight (Since 2019) | 59,525 - 62,610 (27,000 - 28,399) |
| Operating Weight (Since 2020) | 62,150 (28,190) |
| Operating Weight (Since 2022) | 62,390 (28,300) |
| Hydraulic cycle times (unloaded) | |
| Lift | 6 seconds |
| Lower | 3 seconds |
| Tilt | 2 seconds |
| Total cycle time | 12 seconds |
| Hydraulic System | |
| Engine speed | 1,900 rpm |
| Working pressure | Pump 1 - 20 MPa Pump 2 - 21 MPa |
| Working pressure | Pump 1 - 29 MPa Pump 2 - 31 MPa Pump 3 - 25 MPa |
| Operating Specifications | |
| Cooling System Fluid Capacity | 15 gal (55 l) |
| DEF tank capacity | 8 gal (31 l) |
| Engine Oil Fluid Capacity | 13 gal (50 l) |
| Fuel Capacity | 97 gal (366 l) |
| Hydraulic System Fluid Capacity | 41 gal (156 l) |
| Rated Bucket Capacity | 5 - 18 cu yd (4 - 14 cu m) |
| Transmission Fluid Capacity | 13 gal (48 l) |
| Steering System | |
| Articulation angle | 37 degrees |
| Cylinder bore | 4 in (10 cm) |
| Maximum flow | 53 gpm (202 lpm) |
| Maximum flow | 67 gpm (252 lpm) |
| Rod diameter | 2 in (6 cm) |
| Steering cylinders | 2 |
| Stroke | 2 ft (1 m) |
| Working pressure | 21 MPa 210 bar |
| Weights | |
| Operational Weight | 52,000 - 59,400 lbs (23,587 - 26,943 kg) |