Categories ↠ Compact Track Loaders ↠ Mustang MTL25

Mustang MTL25 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Mustang ➔
Model: MTL25 ➔

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	14 in (36 cm)
Height - Top of Cab	7 ft (2 m)
Length - with Bucket	13 ft (4 m)
Length - without Bucket	10 ft (3 m)
Reach at Max Lift and Dump	4 ft (1 m)
Turning Radius from Center - inc bucket	106 in (269 cm)
Turning Radius from Center - machine rear	72 in (182 cm)
Width Over Tracks	6 ft (2 m)

Engine

Aspiration	turbocharged
Displacement	269 cu in (4,402 cu cm)
Engine Model	4TNV106T
Gross Power	97 hp (72 kw)
Number of Cylinders	4
Peak Torque	291 lbs ft (395 nm)
Power Measured @	2200 rpm
Torque Measured @	1400 rpm

Hydraulic System

Pump Flow	24 gpm (89 lpm)
Relief Valve Pressure	2987.8 psi

Loader

Breakout Force	8,692 lbs (3,943 kg)
Bucket Capacity	1 cu yd (1 cu m)
Operating Load	3,527 lbs (1,600 kg)
Tipping Angle	7057 degrees

Operating Specifications

Alternator Supplied Amperage	60 amps
Cooling System Fluid Capacity	4 gal (15 l)
Engine Oil Capacity	4 gal (14 l)
Fuel Capacity	29 gal (108 l)
Hydraulic System Fluid Capacity	25 gal (95 l)
Max Speed - high range	7 mph (11 kph)
Max Speed - low range	5 mph (8 kph)
Operating Voltage	12 volts
Operating Weight	10,693 lbs (4,850 kg)

Undercarriage

Ground Contact Area	1,132 cu in (18,553 cu cm)
Ground Pressure	4.3 psi
Length of Track on Ground	5 ft (2 m)
Number of Track Rollers per Side	5
Track Gauge	5 ft (1 m)
Width of Track	18 in (46 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon