- Category: Compact Track Loaders ➔
- Manufacturer: Volvo ➔
- Model: MCT135C ➔
The Volvo MCT135C Compact Track Loader is a powerful and versatile machine designed to handle a wide range of tasks with ease. With impressive bucket breakout forces, generous bucket capacities, and efficient hydraulic systems, this compact track loader can tackle everything from landscaping and material handling to construction and agriculture. Its compact size, comfortable cab, and robust engine make it a reliable workhorse for any job site. Explore the detailed specifications of the Volvo MCT135C to see how it can enhance your productivity and performance.
Bucket
| Breakout force, curl | 7,187 lbs (3,260 kg)
|
| Breakout force, lift | 5,807 lbs (2,634 kg)
|
| General Purpose Bucket Heaped | 1 cu yd (1 cu m)
|
| General Purpose Bucket Height | 2 ft (1 m)
|
| General Purpose Bucket Length | 3 ft (1 m)
|
| General Purpose Bucket Weight | 576 lbs (261 kg)
|
| General Purpose Bucket Width | 7 ft (2 m)
|
| Landscape Bucket Heaped cap | 1 cu yd (1 cu m)
|
| Landscape Bucket Height | 2 ft (1 m)
|
| Landscape Bucket Length | 3 ft (1 m)
|
| Landscape Bucket Weight | 1 cu in (8 cu cm)
|
| Landscape Bucket Width | 7 ft (2 m)
|
| Multi Purpose Bucket Heaped cap | 1 cu yd (1 cu m)
|
| Multi Purpose Bucket Height | 2 ft (1 m)
|
| Multi Purpose Bucket Length | 3 ft (1 m)
|
| Multi Purpose Bucket Weight | 884 lbs (401 kg)
|
| Multi Purpose Bucket Width | 7 ft (2 m)
|
Capacities
| Cooling system | 4 gal (16 l)
|
| Engine oil w/ filter change | 4 gal (15 l)
|
| Fuel Tank | 27 gal (103 l)
|
| Hydraulic oil reservoir | 7 gal (26 l)
|
| Hydraulic system | 16 gal (60 l)
|
| Tipping Load | 8,627 lbs (3,913 kg)
|
Dimensions
| Angle of departure | 28.7 degrees
|
| Attachment roll back angle | 30 degrees
|
| Clearance at Max Lift and Dump | 8 ft (2 m)
|
| Dump angle | 42 degrees
|
| Dump Height | 8 ft (2 m)
|
| Dump reach | 36 in (90 cm)
|
| Height - Top of Cab | 7 ft (2 m)
|
| Height to Hinge Pin | 125 in (318 cm)
|
| Length - with Bucket | 13 ft (4 m)
|
| Length - without Bucket | 9 ft (3 m)
|
| Overall height | 7 ft (2 m)
|
| Overall length (L/bucket) | 10 ft (3 m)
|
| Overall length (W/bucket) | 13 ft (4 m)
|
| Reach at Max Lift and Dump | 3 ft (1 m)
|
| Turning Radius | 6 ft (2 m)
|
| Turning Radius from Center - inc bucket | 69 in (176 cm)
|
| Turning Radius from Center - machine rear | 69 in (176 cm)
|
| Turning radius front L/bucket | 5 ft (1 m)
|
| Turning radius front W/bucket | 8 ft (2 m)
|
| Wheelbase | 6 ft (2 m)
|
| Width Over Tracks | 7 ft (2 m)
|
Engine
| Alternator | 342000 amps
|
| Battery | 12 - 109 (V - Ah)
|
| Fuel Type | Diesel
|
| Gross horsepower - SAE J1995 | 74 hp (55 kw)
|
| Max Torque | 295 lbs ft (400 nm)
|
| Net Power | 92 hp (69 kw)
|
| Number of Cylinders | 4
|
| Peak Torque | 301 lbs ft (408 nm)
|
| Power Measured @ | 2200 rpm
|
| Starter | 6 hp (4 kw)
|
| Torque Measured @ | 1800 rpm
|
Hydraulic System
| Pump Flow | 23 gpm (87 lpm)
|
| Relief Valve Pressure | 3335 psi
|
Loader
| Bucket Capacity | 1 cu yd (1 cu m)
|
| High flow pump output | 33 gpm (125 lpm)
|
| Operating Load | 3,000 lbs (1,361 kg)
|
| Operating Width | 78 in (198 cm)
|
| Standard hydraulic pump output | 24 gpm (90 lpm)
|
| System pressure | 3335 psi
|
| Tipping Angle | 8628 degrees
|
Operating Specifications
| Alternator Supplied Amperage | 95 amps
|
| Cooling System Fluid Capacity | 4 gal (16 l)
|
| Engine Oil Capacity | 4 gal (15 l)
|
| Fuel Capacity | 27 gal (103 l)
|
| Hydraulic System Fluid Capacity | 16 gal (60 l)
|
| Max Speed - high range | 8 mph (13 kph)
|
| Max Speed - low range | 6 mph (9 kph)
|
| Operating Voltage | 12 volts
|
| Operating Weight | 10,663 lbs (4,837 kg)
|
Performance
| Curl | 1.7 seconds
|
| Dump | 2.3 seconds
|
| Lift arm path | Vertical
|
| Lower (power down) | 3.5 seconds
|
| Raise (lifting) | 5.1 seconds
|
| Rated operating load, 35% tip | 3,001 lbs (1,361 kg)
|
Speeds
| Single speed | 6 mph (9 kph)
|
Undercarriage
| Width of Track | 18 in (45 cm)
|
Weights
| Weight | 11,288 lbs (5,120 kg)
|