Categories ↠ Motor Graders ↠ Case 845B DHP

Case 845B DHP Motor Grader

Category: Motor Graders ➔
Manufacturer: Case ➔
Model: 845B DHP ➔

The Case 845B DHP Motor Grader offers powerful performance and precise control for a variety of grading and leveling tasks. With a turbocharged engine delivering 160 horsepower and 560 lb-ft of torque, this grader ensures efficient operation on any job site. Its 12-foot moldboard provides a maximum depth of cut of 28 inches, while the 360-degree circle rotation and 25-degree articulation angle allow for superior maneuverability. With a comfortable Isomount cab and advanced hydraulic system, the Case 845B DHP is a reliable and versatile machine for all grading needs.

See all Case 845B DHPs for sale

Circle

Diameter	69.00 in (175.26 cm)
Max Lift Above Ground	17.50 in (44.45 cm)
Rotation	360 degrees

Dimensions

Blade Base	8.50 ft (2.59 m)
Front Ground Clearance	2.10 ft (0.64 m)
Height to Top of Isomount Cab	11.00 ft (3.35 m)
Overall Length	28.00 ft (8.53 m)
Rear Ground Clearance	1.30 ft (0.40 m)
Tandem Axle Wheelbase	5.20 ft (1.58 m)
Wheelbase	20.50 ft (6.25 m)
Width Over Tires	8.20 ft (2.50 m)

Engine

Aspiration	Turbocharged with air to air aftercooler
Displacement	409.00 cu in (6,702.32 cu cm)
Engine Model	FPT 6.7L
Net Power Gears 7-8	160.00 hp (119.31 kw)
Net Torque Gears 7-8	560.00 lbs ft (759.25 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1500 rpm

Front Axle

Oscillation - Total	15.3 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	49.00 gpm (185.47 lpm)
Pump Type	load sensing piston

Moldboard

Blade Down Pressure	16,854.00 lbs (7,644.86 kg)
Max Depth of Cut	28.00 in (71.12 cm)
Moldboard Height	22.00 in (55.88 cm)
Moldboard Thickness	0.90 in (2.29 cm)
Moldboard Width	12.00 ft (3.66 m)
Side Shift Left	21.00 in (53.34 cm)
Side Shift Right	27.00 in (68.58 cm)

Operating Specifications

Alternator Supplied Amperage	90 amps
Circle Gearbox Fluid Capacity	0.80 gal (3.03 l)
Cooling System Fluid Capacity	10.50 gal (39.74 l)
Fuel Capacity	90.00 gal (340.65 l)
Hydraulic System Fluid Capacity	47.50 gal (179.79 l)
Oil System Fluid Capacity	18.50 gal (70.02 l)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	10.50 gal (39.74 l)
Std Operation Weight - Front Axle	9,912.00 lbs (4,496.01 kg)
Std Operation Weight - Rear Axle	22,287.00 lbs (10,109.23 kg)
Std Operation Weight - Total	32,199.00 lbs (14,605.24 kg)
Tandem Case Fluid Capacity (each)	15.90 gal (60.18 l)
Tire Size	14.0 x 24-10 PR
Transmission Fluid Capacity	21.00 gal (79.49 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	23.80 ft (7.25 m)

Transmission

Max Speed - Forward	26.60 mph (42.81 kph)
Max Speed - Reverse	17.70 mph (28.49 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	direct drive powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon