Categories ↠ Motor Graders ↠ Komatsu GD675-3

Komatsu GD675-3 Motor Grader

Category: Motor Graders ➔
Manufacturer: Komatsu ➔
Model: GD675-3 ➔

The Komatsu GD675-3 Motor Grader boasts powerful performance and versatile functionality, making it an ideal choice for a wide range of grading applications. With a maximum power of 199.9 hp and advanced features such as hydraulic system pump flow of 51 gpm and a full power shift transmission, this motor grader offers unmatched efficiency and precision on the job site. Equipped with a 12-foot moldboard and a 60.3-inch circle diameter, the GD675-3 ensures superior cutting and shaping capabilities. From its turbocharged and air-to-air aftercooled engine to its ergonomic design and reliable operation, this motor grader is designed to deliver exceptional results in any grading project.

See all Komatsu GD675-3s for sale

Blades

Maximum Shoulder Reach Outside of Tires - Left	79 in (201 cm)
Maximum Shoulder Reach Outside of Tires - Right	79 in (201 cm)
Moldboard Sideshift - Left	25 in (63 cm)
Moldboard Sideshift - Right	25 in (63 cm)

Circle

Blade Tip Angle - Front	40 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	60 in (153 cm)
Max Reach Outside Tires - Left	79 in (200 cm)
Max Reach Outside Tires - Right	79 in (200 cm)
Rotation	360 degrees
Shift Left	25 in (63 cm)
Shift Right	25 in (63 cm)

Dimensions

Blade Base	835 ft (255 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	32 ft (10 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	20 ft (6 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	Turbocharged and air-to-air aftercooled
Base Power (1st Gear) - Net	180 hp (134 kw)
Displacement	505 cu in (8,271 cu cm)
Engine Model	SAA6D114E-3
Max Power	200 hp (149 kw)
Net Power Gear 1-2	180 hp (134 kw)
Net Power Gear 4-6	200 hp (149 kw)
Net Power Gear 5-6	200 hp (149 kw)
Net Power Gears 7-8	200 hp (149 kw)
Net Torque Gears 1-2	612 lbs ft (830 nm)
Net Torque Gears 3-4	719 lbs ft (975 nm)
Net Torque Gears 5-6	719 lbs ft (975 nm)
Net Torque Gears 7-8	719 lbs ft (975 nm)
Number of Cylinders	6
Power Measured @	1900 rpm
Torque Measured @	1400 rpm

Front Axle

Ground Clearance	3 ft (1 m)
Oscillation - Total	32 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	51 gpm (193 lpm)
Pump Type	load-sensing closed center hydraulics
Relief Valve Pressure	3000 psi

Moldboard

Max Depth of Cut	32 in (82 cm)
Moldboard Height	26 in (66 cm)
Moldboard Length	12 ft (4 m)
Moldboard Thickness	1 in (3 cm)
Moldboard Width	12 ft (4 m)
Side Shift Left	32 in (82 cm)
Side Shift Right	32 in (82 cm)

Operating Specifications

Alternator Supplied Amperage	90 amps
Circle Gearbox Fluid Capacity	1 gal (5 l)
Cooling System Fluid Capacity	11 gal (40 l)
Fuel Capacity	90 gal (340 l)
Hydraulic System Fluid Capacity	12 gal (45 l)
Operating Voltage	24 volts
Operating Weight	38,705 lbs (17,556 kg)
Std Operation Weight - Front Axle	9,480 lbs (4,300 kg)
Std Operation Weight - Rear Axle	25,375 lbs (11,510 kg)
Std Operation Weight - Total	34,855 lbs (15,810 kg)
Tandem Case Fluid Capacity (each)	22 gal (83 l)
Tire Size	low pressure tubeless 17.5R25
Transmission Fluid Capacity	12 gal (45 l)

Steering System

Articulation Angle	23 degrees
Turning Radius	2 ft (1 m)

Transmission

Max Speed - Forward	26 mph (42 kph)
Max Speed - Reverse	24 mph (38 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift transmission

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon