Categories ↠ Motor Graders ↠ Mitsubishi MG430-E

Mitsubishi MG430-E Motor Grader

Category: Motor Graders ➔
Manufacturer: Mitsubishi ➔
Model: MG430-E ➔

Circle

Blade Tip Angle - Front	40 degrees
Blade Tip Angle - Rear	8 degrees
Max Lift Above Ground	19 in (49 cm)
Rotation	360 degrees
Shift Left	78 in (198 cm)
Shift Right	79 in (200 cm)

Dimensions

Blade Base	9 ft (3 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	28 ft (9 m)
Wheelbase	21 ft (6 m)
Width Over Tires	8 ft (2 m)

Engine

Displacement	729 cu in (11,946 cu cm)
Engine Model	6D24-E1
Max Power	155 hp (116 kw)
Number of Cylinders	6
Power Measured @	2000 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	30 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	27 gpm (100 lpm)
Pump Type	tandem gear
Relief Valve Pressure	2.5 psi

Moldboard

Moldboard Height	24 in (61 cm)
Moldboard Thickness	1 in (2 cm)

Operating Specifications

Alternator Supplied Amperage	40 amps
Circle Gearbox Fluid Capacity	1 gal (4 l)
Fuel Capacity	56 gal (210 l)
Hydraulic System Fluid Capacity	18 gal (67 l)
Oil System Fluid Capacity	4 gal (16 l)
Operating Voltage	24 volts
Std Operation Weight - Total	36,156 lbs (16,400 kg)
Tandem Case Fluid Capacity (each)	7 gal (28 l)
Tire Size	14.00-24-12
Transmission Fluid Capacity	6 gal (23 l)

Steering System

Articulation Angle

29 degrees

Transmission

Max Speed - Forward	28 mph (45 kph)
Max Speed - Reverse	29 mph (46 kph)
Number of Gears - Forward	6
Number of Gears - Reverse	6
Transmission Type	planetary

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon