- Category: Motor Graders ➔
- Manufacturer: Volvo ➔
- Model: G976 ➔
The Volvo G976 is a motor grader designed for road construction, maintenance, and site preparation. It is used to shape and level surfaces, spread material, and maintain grades on highways, mining roads, and large earthmoving projects. The G976 is part of Volvo's grader lineup and is built for precision grading, operator control, and consistent performance in demanding conditions. Typical applications include ditching, slope work, snow removal, and finish grading. As a motor grader, the Volvo G976 is commonly referenced in heavy equipment fleets, construction equipment listings, and infrastructure maintenance operations.
Circle
| Blade Tip Angle - Front | 45 degrees
|
| Blade Tip Angle - Rear | 6 degrees
|
| Diameter | 64 in (163 cm)
|
| Max Reach Outside Tires - Left | 78 in (198 cm)
|
| Max Reach Outside Tires - Right | 77 in (196 cm)
|
| Rotation | 360 degrees
|
| Shift Left | 31 in (77 cm)
|
| Shift Right | 30 in (75 cm)
|
Dimensions
| Blade Base | 9 ft (3 m)
|
| Height to Top of Isomount Cab | 11 ft (3 m)
|
| Overall Length | 31 ft (9 m)
|
| Wheelbase | 21 ft (7 m)
|
| Width Over Tires | 9 ft (3 m)
|
Engine
| Aspiration | Turbocharged Aftercooled
|
| Displacement | 573 cu in (9,390 cu cm)
|
| Engine Model | D9B
|
| Max Power | 262 hp (195 kw)
|
| Net Power Gears 7-8 | 262 hp (195 kw)
|
| Net Torque Gears 7-8 | 876 lbs ft (1,188 nm)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1700 rpm
|
| Torque Measured @ | 1550 rpm
|
Front Axle
| Ground Clearance | 23 ft (7 m)
|
| Oscillation - Total | 16 degrees
|
| Wheel Lean | 18 degrees
|
Hydraulic System
| Pump Flow | 55 gpm (208 lpm)
|
| Pump Type | Axial piston pump
|
| Relief Valve Pressure | 3000 psi
|
Moldboard
| Blade Down Pressure | 21,574 lbs (9,786 kg)
|
| Blade Pull at Max Weight | 40,000 lbs (18,144 kg)
|
| Max Depth of Cut | 31 in (77 cm)
|
| Moldboard Height | 29 in (74 cm)
|
| Moldboard Thickness | 1 in (3 cm)
|
| Moldboard Width | 12 ft (4 m)
|
| Side Shift Left | 27 in (67 cm)
|
| Side Shift Right | 27 in (67 cm)
|
Operating Specifications
| Alternator Supplied Amperage | 80 amps
|
| Cooling System Fluid Capacity | 12 gal (47 l)
|
| Fuel Capacity | 132 gal (500 l)
|
| Hydraulic System Fluid Capacity | 38 gal (144 l)
|
| Max Operation Weight - Front Axle | 18,500 lbs (8,391 kg)
|
| Max Operation Weight - Rear Axle | 35,000 lbs (15,876 kg)
|
| Max Operation Weight - Total | 51,500 lbs (23,360 kg)
|
| Oil System Fluid Capacity | 10 gal (39 l)
|
| Operating Voltage | 24 volts
|
| Std Operation Weight - Front Axle | 12,340 lbs (5,597 kg)
|
| Std Operation Weight - Rear Axle | 31,310 lbs (14,202 kg)
|
| Std Operation Weight - Total | 43,650 lbs (19,799 kg)
|
| Tandem Case Fluid Capacity (each) | 26 gal (100 l)
|
| Tire Size | 14:00 x 24 G-2
|
| Transmission Fluid Capacity | 16 gal (61 l)
|
Steering System
| Articulation Angle | 21 degrees
|
| Turning Radius | 25 ft (8 m)
|
Transmission
| Max Speed - Forward | 27 mph (44 kph)
|
| Max Speed - Reverse | 19 mph (31 kph)
|
| Number of Gears - Forward | 8
|
| Number of Gears - Reverse | 4
|
| Transmission Type | HTE 840 Fully sequential direct drive Volvo powershift transmission
|