- Category: Scrapers ➔
- Manufacturer: Caterpillar ➔
- Model: 615C Series II ➔
The Caterpillar 615C Series II Scraper is a powerful machine designed for heavy-duty earthmoving and construction projects. With a bowl width of 9.5 feet and a maximum scraper blade height of 19.5 inches, this scraper offers impressive performance and efficiency. Equipped with a turbocharged, jacket-water aftercooled Caterpillar engine producing 265 horsepower, this scraper can handle a rated load of 40,800 pounds and has a bowl capacity of 17 cubic yards. From its hydraulic system capabilities to its transmission speeds, the Caterpillar 615C Series II is a reliable and robust choice for any job site.
Bowl
Dimensions
| Front of Tractor to Front Axle | 117 in (297 cm)
|
| Height - Overall Shipping | 141 in (359 cm)
|
| Height - Scraper Blade Maximum | 20 in (50 cm)
|
| Height - Top of Cab | 11 ft (3 m)
|
| Height to Top of Suspended Cab | 11 ft (3 m)
|
| Length - Overall Machine | 457 in (1,161 cm)
|
| Overall Height | 12 ft (4 m)
|
| Overall Length | 38 ft (12 m)
|
| Rear Axle - Rear of Machine | 56 in (142 cm)
|
| Tractor Ground Clearance | 2 ft (1 m)
|
| Wheel Base | 23 ft (7 m)
|
| Wheelbase | 23 ft (7 m)
|
| Width - Inside of Bowl | 103 in (262 cm)
|
| Width - Outside Rear Tires | 120 in (305 cm)
|
| Width - Overall Machine | 120 in (305 cm)
|
| Width - Rear Tire Center Lines | 83 in (212 cm)
|
Elevator
| Length - Flights | 78 in (197 cm)
|
| Length - Overall | 147 in (372 cm)
|
| Length of Flights | 7 ft (2 m)
|
| Max Working Speed | 245 ft/min (75 m/min)
|
| Number of Flights | 18
|
| Spacing of Flights | 16 in (41 cm)
|
| Width - Flight Face | 7 in (18 cm)
|
| Width of Flight Face | 7 in (18 cm)
|
Engine
| Bore | 5 in (12 cm)
|
| Displacement | 638 cu in (10,455 cu cm)
|
| Flywheel Power - Tractor/Scraper | 197 kW (265)
|
| Gross Power - Gears 1-2 | 279 hp (208 kw)
|
| Net Power | 265 hp (198 kw)
|
| Net Power - Gears 1-2 | 265 hp (198 kw)
|
| Net Power - Gears 3-8 | 265 hp (198 kw)
|
| Stroke | 6 in (15 cm)
|
| Tractor Engine | Cat 3306
|
Hydraulic System
| Bowl Cylinder Bore | 5 in (13 cm)
|
| Bowl Cylinder Stroke | 23 in (57 cm)
|
| Compensator Settings - Elevator Circuit | 1000.76 psi
|
| Ejector Cylinder Bore | 4 in (11 cm)
|
| Ejector Cylinder Stroke | 43 in (109 cm)
|
| Floor Cylinder Bore | 6 in (14 cm)
|
| Floor Cylinder Stroke | 27 in (68 cm)
|
| Relief Valve - Steering Circuit | 1000.76 psi
|
| Scraper Circuit | 36 gpm (136 lpm)
|
| Steering Circuit | 51 gpm (193 lpm)
|
Operating Specifications
| Engine Oil Capacity | 6 gal (23 l)
|
| Engine Oil Fluid Capacity | 6 gal (24 l)
|
| Tire Size | 29.5-R25
|
Scraper Bowl
| Capacity - Struck | 14 cu yd (11 cu m)
|
| Depth of Cut - Maximum | 16 in (40 cm)
|
| Depth of Spread - Maximum | 16 in (41 cm)
|
| Ground Clearance - Maximum | 17 in (44 cm)
|
| Rated Load | 40,800 lbs (18,507 kg)
|
| Scraper Capacity - Heaped | 17 cu yd (13 cu m)
|
| Width - Cut - To Router Bits | 10 in (24 cm)
|
Service Refill Capacities
| Cooling System | 17 gal (64 l)
|
| Crankcase | 6 gal (23 l)
|
| Differential | 16 gal (61 l)
|
| Final Drive - Each | 16 gal (61 l)
|
| Fuel Tank | 105 gal (397 l)
|
| Hydraulic Reservoir | 42 gal (159 l)
|
| Transmission | 10 gal (36 l)
|
Standards
| Brakes | Meets SAE J1473 & ISO 3450 stds
|
Steering System
| Hydraulic Output | 51 gpm (193 lpm)
|
| Steering Angle - Left | 85 degrees
|
| Steering Angle - Right | 90 degrees
|
| Width - 180 degrees Turn | 32 ft (10 m)
|
Tractor Engine
| Aspiration | turbocharged jacket-water aftercooled
|
| Displacement | 638 cu in (10,455 cu cm)
|
| Gross Power | 279 hp (208 kw)
|
| Make | Caterpillar
|
| Net Power | 265 hp (198 kw)
|
Transmission
| 1 Forward | 2 mph (4 kph)
|
| 2 Forward | 4 mph (6 kph)
|
| 3 Forward | 6 mph (10 kph)
|
| 4 Forward | 10 mph (16 kph)
|
| 5 Forward | 18 mph (28 kph)
|
| 6 Forward | 28 mph (44 kph)
|
| Max Speed Forward | 28 mph (44 kph)
|
| Max Speed Reverse | 2 mph (4 kph)
|
| Number of Forward Gears | 6
|
| Number of Reverse Gears | 1
|
| Top Speed - Loaded | 28 mph (44 kph)
|
| Transmission Type | planetary power-shift manual transmission
|
Weights
| Front Axle | 37,250 lbs (16,896 kg)
|
| Front Axle Weight - Loaded | 50,010 lbs (22,684 kg)
|
| Rear Axle | 19,200 lbs (8,709 kg)
|
| Rear Axle - Weight - Loaded | 47,240 lbs (21,428 kg)
|
| Total Operating - Loaded | 97,250 lbs (44,112 kg)
|
