Categories ↠ Skid Steer Loaders ↠ Case 435 III

Case 435 III Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: 435 III ➔

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	9 in (24 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	9 ft (3 m)
Length with Bucket	11 ft (3 m)
Reach at Max Lift and Dump	28 in (70 cm)
Turning Radius from Center - inc bucket	80 in (202 cm)
Turning Radius from Center - machine rear	53 in (135 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	195 cu in (3,200 cu cm)
Engine Model	432T/M3 diesel Tier III certified
Number of Cylinders	4
Power Measured @	2300 rpm

Hydraulic System

Pump Flow Capacity	24 gpm (90 lpm)
Pump Type	Gear
Relief Valve Pressure	3050 psi

Loader

Breakout Force	4400 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	2,200 lbs (998 kg)
Tipping Angle	4398.3 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - each side	2 gal (8 l)
Cooling System Fluid Capacity	3 gal (12 l)
Engine Oil Fluid Capacity	2 gal (9 l)
Fuel Capacity	17 gal (66 l)
Hydraulic System Fluid Capacity	11 gal (42 l)
Max Speed	7 mph (11 kph)
Operating Speed	7 mph (11 kph)
Operating Voltage	12 volts
Operating Weight	6,779 lbs (3,075 kg)
Tire Size	12.00 x 16.5 10 ply

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon