- Category: Skid Steer Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 246 ➔
The Caterpillar 246 is a skid steer loader designed for material handling, grading, loading, and general construction tasks. Built by Caterpillar, the 246 model is used in landscaping, agriculture, site preparation, and utility work where compact size and maneuverability are important. As a skid steer loader, it uses a rigid frame and lift arms that support a wide range of attachments, including buckets, forks, augers, and grapples. The Caterpillar 246 is recognized for its versatility in confined work areas and its compatibility with multiple jobsite applications. It remains a reference model in the Caterpillar skid steer loader lineup.
Cab
| FOPS | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
|
| FOPS Level II | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
|
| ROPS | SAE J1040 MAY94 and ISO3471:1994
|
Dimensions
| Bucket Pin Height - Carry Position | 10 in (25 cm)
|
| Bucket Pin Height - Maximum Lift | 10 ft (3 m)
|
| Bumper Overhang - Rear Axle | 41 in (104 cm)
|
| Clearance at Max Lift and Dump | 8 ft (2 m)
|
| Clearance at Maximum Lift and Dump | 94 in (239 cm)
|
| Ground Clearance | 9 in (23 cm)
|
| Height - Top of Cab | 7 ft (2 m)
|
| Length - With Bucket on Ground | 138 in (351 cm)
|
| Length - Without Bucket | 110 in (279 cm)
|
| Length w/o Bucket | 9 ft (3 m)
|
| Length with Bucket | 12 ft (4 m)
|
| Maximum Overall Height | 156 in (396 cm)
|
| Reach - Maximum Lift/Dump | 21 in (53 cm)
|
| Reach at Max Lift and Dump | 23 in (59 cm)
|
| Turning Radius from Center - inc bucket | 87 in (220 cm)
|
| Vehicle Width over Tires | 66 in (168 cm)
|
| Wheel Base | 4 ft (1 m)
|
| Wheelbase | 4 ft (1 m)
|
| Width Over Tires | 6 ft (2 m)
|
Engine
| Aspiration | Turbocharged
|
| Bore | 4 in (10 cm)
|
| Displacement | 183 cu in (2,999 cu cm)
|
| Engine Make | Caterpillar
|
| Engine Model | Cat 3034C
|
| Net Flywheel Power | 55 hp (41 kw)
|
| Number of Cylinders | 4
|
| Power Measured @ | 2600 rpm
|
| Stroke | 4 in (10 cm)
|
Hydraulic System
| Hydraulic Flow | Standard flow
|
| Loader Hydraulic Flow | 22 gpm (83 lpm)
|
| Loader Hydraulic Pressure | 3300 psi
|
| Pump Flow Capacity | 22 gpm (83 lpm)
|
Loader
| Bucket Capacity | 1 cu yd (0 cu m)
|
| Operating Load Rating | 2,000 lbs (907 kg)
|
| Tipping Angle | 3410 degrees
|
Operating Specifications
| Breakout Force - Lift Cylinder | 4,339 lbs (1,968 kg)
|
| Breakout Force - Tilt Cylinder | 5,259 lbs (2,385 kg)
|
| Fuel Capacity | 24 gal (90 l)
|
| Hydraulic System Fluid Capacity | 14 gal (52 l)
|
| Max Speed | 7 mph (11 kph)
|
| Operating Speed | 8 mph (12 kph)
|
| Operating Weight | 7,230 lbs (3,279 kg)
|
| Rated Operating Capacity | 2,000 lbs (907 kg)
|
| Rated Operating Capacity with Optional Counterweight | 2,100 lbs (953 kg)
|
| Tipping Load | 4,000 lbs (1,814 kg)
|
Service Refill Capacities
| Chain Box - Each Side | 2 gal (8 l)
|
| Cooling System | 3 gal (10 l)
|
| Engine Crankcase | 2 gal (7 l)
|
| Fuel Tank | 24 gal (90 l)
|
| Hydraulic System | 14 gal (52 l)
|
| Hydraulic Tank | 9 gal (35 l)
|
Weights
| Operating Weight | 7,087 lbs (3,215 kg)
|