Categories ↠ Skid Steer Loaders ↠ Mustang 2026

Mustang 2026 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Mustang ➔
Model: 2026 ➔

See all Mustang 2026s for sale

General Specifications

ENGINE POWER HP (KW)	35 (26) Starting 2016 Model Year
OPERATING LOAD LBS. (KG)	1,050 (476) Starting 2016 Model Year
OPERATING WIDTH IN. (CM)	48.4 (123) Starting 2016 Model Year

Dimensions

Clearance at Max Lift and Dump	7 ft (2 m)
Ground Clearance	6 in (15 cm)
Height - Top of Cab	9 ft (3 m)
Length w/o Bucket	8 ft (2 m)
Length with Bucket	10 ft (3 m)
Reach at Max Lift and Dump	23 in (58 cm)
Turning Radius from Center - inc bucket	70 in (177 cm)
Turning Radius from Center - machine rear	54 in (137 cm)
Wheelbase	3 ft (1 m)
Width Over Tires	5 ft (1 m)

Engine

Displacement	100 cu in (1,639 cu cm)
Engine Model	3TNV88
Gross Power	35 hp (26 kw)
Number of Cylinders	3
Power Measured @	2600 rpm

Hydraulic System

Pump Flow Capacity	15 gpm (55 lpm)
Relief Valve Pressure	2750 psi

Loader

Breakout Force	2200 psi
Bucket Capacity	0 cu yd (0 cu m)
Operating Load Rating	1,175 lbs (533 kg)
Operating Width	48 in (122 cm)
Tipping Angle	2100 degrees

Operating Specifications

Alternator Supplied Amperage	650 amps
Fuel Capacity	10 gal (39 l)
Hydraulic System Fluid Capacity	10 gal (38 l)
Max Speed	7 mph (11 kph)
Operating Voltage	12 volts
Operating Weight	4,000 lbs (1,814 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon