Categories ↠ Telehandlers ↠ Caterpillar TL1055C

Caterpillar TL1055C Telehandler

Category: Telehandlers ➔
Manufacturer: Caterpillar ➔
Model: TL1055C ➔

The Caterpillar TL1055C is a telehandler designed for material handling, lifting, and placement tasks on construction and industrial sites. It features a telescopic boom for extended reach and load positioning, making it suitable for moving palletized materials, jobsite supplies, and other heavy loads in confined or elevated areas. The TL1055C is part of Caterpillar's telehandler lineup and is commonly used in building construction, agriculture, and general material handling applications. Its design supports versatility, operator visibility, and maneuverability on rough terrain. The model is identified by the TL1055C designation within Caterpillar's equipment range.

See all Caterpillar TL1055Cs for sale

Axles

Manufacturer

Dana

Boom Performance

Boom Down	13.7 seconds
Boom Up	13.8 seconds
Drawbar Pull - Basic	20,000 lbs (9,072 kg)
Tele In	14.8 seconds
Tele Out	17.4 seconds

Brakes

Features	Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes - mechanical on front axle
Parking Brake	mechanical on front axle

Dimensions

Ground Clearance	18 in (46 cm)
Height	8 ft (3 m)
Length - Fork Face	21 ft (6 m)
Length to Fork Face	21 ft (6 m)
Overall Height	8 ft (3 m)
Turning Radius - Over Tires	14 ft (4 m)
Turning Radius Outside Tires	14 ft (4 m)
Wheel Base	12 ft (4 m)
Wheelbase	12 ft (4 m)
Width Over Tires	8 ft (3 m)

Engine

Bore	4 in (11 cm)
Engine Make	CATERPILLAR
Engine Model	Cat C4.4 ACERT Tier 4 Interim
Gross Power	142 hp (106 kw)
Gross Power - Basic	142 hp (106 kw)
Stroke	5 in (13 cm)

Hydraulic System

Pump Flow Capacity	15 gpm (57 lpm)
Pump Type	Load sensing piston
Relief Valve Pressure	3650 psi

Instrumentation

Features

Volt meter hourmeter engine oil pressure gauge fuel gauge water temperature gauge

Lift System

Max Forward Reach	10 ft (3 m)
Max Lift Capacity	10,000 lbs (4,536 kg)
Max Lift Height	55 ft (17 m)
Max Load at Max Height	5,000 lbs (2,268 kg)
Max Load at Max Reach	2,500 lbs (1,134 kg)

Operating Specifications

Drawbar Pull	24,000 lbs (10,886 kg)
Fuel Capacity	38 gal (144 l)
Hydraulic System Fluid Capacity	63 gal (238 l)
Load at Maximum Height	5,000 lbs (2,268 kg)
Load at Maximum Height - Stabilizers Down	5,000 lbs (2,268 kg)
Load at Maximum Reach	2,500 lbs (1,134 kg)
Load at Maximum Reach - Stabilizers Down	2,500 lbs (1,134 kg)
Maximum Forward Reach	43 ft (13 m)
Maximum Lift Height	55 ft (17 m)
Operating Weight	34,161 lbs (15,495 kg)
Rated Load Capacity	10,000 lbs (4,536 kg)
Tire Size	400/75-28 Duraforce MT
Top Travel Speed	20 mph (33 kph)

Operator Station

Features

Vinyl suspension seat single electronic joystick spacious interior ergonomic cab

Service Refill Capacities

Fuel Tank	38 gal (144 l)
Hydraulic System	63 gal (238 l)
Hydraulic Tank	63 gal (238 l)

Tires

Optional Construction	14.00 x 24 Foam Filled Rock Lug or Solid
Standard	14.00 x 24 - 12 PR

Transmission

Max Speed - forward	20 mph (33 kph)
Number of Forward Gears	4
Number of Reverse Gears	3

Weights

Operating Weight

34,160 lbs (15,495 kg)

Caterpillar TL1055Cs currently for sale

A 2014 Caterpillar TL1055C From Hendrix Rentals LLC for $39,500.00 USD

A 2014 Caterpillar TL1055C From Hendrix Rentals LLC for $49,500.00 USD

A 2015 Caterpillar TL1055C From Hendrix Rentals LLC for $49,500.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon