- Category: Wheel Loaders ➔
- Manufacturer: Case ➔
- Model: 1021F ➔
The Case 1021F Wheel Loader is a powerful and versatile machine designed for heavy-duty construction and material handling tasks. With a Gross Power of 290 hp and a Rated Bucket Capacity of 5.5 cu yd, this loader is capable of handling large loads with ease. Equipped with a Turbocharged engine and Wet Multi Disc brakes, the Case 1021F offers efficient performance and reliable stopping power. With a Hydraulic System Pump Flow Capacity of 93 gpm and a Transmission Type of Powershift, this wheel loader delivers impressive productivity and control on the job site. With an Operating Weight of 53,791 lbs and a Static Tipping Weight of 35,001 lbs, the Case 1021F is a dependable and durable machine for any construction project.
General Specifications
| Bucket Capacity | 5.5 (4.21) Starting 2016 Model Year |
| Engine Power | 296 (221) Starting 2016 Model Year |
| Engine type | Case/FPT Starting 2016 Model Year |
| Max Dump Height | 10.1 (3) Starting 2016 Model Year |
| Operating Weight | 53,791 (24,399) Starting 2016 Model Year |
Brakes
| Service brake | Wet Multi Disc
|
Bucket
| Breakout Force | 45,097 lbs (20,456 kg)
|
| Bucket Capacity - heaped | 6 cu yd (4 cu m)
|
| Bucket Capacity - struck | 4 cu yd (3 cu m)
|
| Bucket Width | 11 ft (3 m)
|
| Dump Clearance at Max Raise | 10 ft (3 m)
|
Dimensions
| Dump reach @ full height, 45 degrees dump | 4 ft (1 m)
|
| Ground Clearance | 2 ft (1 m)
|
| Height - Top of Cab | 12 ft (4 m)
|
| Hinge Pin - Max Height | 14 ft (4 m)
|
| Length with Bucket on Ground | 29 ft (9 m)
|
| Reach at Max Lift and Dump | 6 ft (2 m)
|
| Wheelbase | 12 ft (4 m)
|
| Width Over Tires | 10 ft (3 m)
|
Engine
| Alternator | 95 amps
|
| Aspiration | Turbocharged
|
| Displacement | 531 cu in (8,702 cu cm)
|
| Emissions level | Interim Tier 4
|
| Engine Model | FPT F2FE614C
|
| Engine speed - Rated speed, full load | 2100 rpm
|
| Gross Power | 290 hp (216 kw)
|
| Make | Case
|
| Max. torque ISO14396 | 1,091 lbs ft (1,479 nm)
|
| Net Power | 262 hp (195 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1800 rpm
|
| Torque Measured @ | 1100 rpm
|
| Torque Rise | 49%
|
Hydraulic cycle times (unloaded)
| Total cycle time | 10.1 seconds
|
Hydraulic System
| Dump Time | 1.3 seconds
|
| Lower Time | 2.6 seconds
|
| Maximum system pressure | 3650 psi
|
| Pump Flow Capacity | 93 gpm (352 lpm)
|
| Pump Type | Axial Piston Pump
|
| Raise Time | 6.2 seconds
|
| Steering pump type | Articulation
|
Operating Specifications
| Cooling System Fluid Capacity | 15 gal (57 l)
|
| Engine Oil Fluid Capacity | 8 gal (31 l)
|
| Front Axle/Diff Fluid Capacity | 14 gal (51 l)
|
| Fuel Capacity | 125 gal (473 l)
|
| Hydraulic System Fluid Capacity | 66 gal (250 l)
|
| Operating Weight | 53,791 lbs (24,399 kg)
|
| Rated Bucket Capacity | 6 cu yd (4 cu m)
|
| Rear Axle/Diff Fluid Capacity | 14 gal (51 l)
|
| Static Tipping Weight | 35,001 lbs (15,876 kg)
|
| Tire Size | 26.5R25
|
| Transmission Fluid Capacity | 12 gal (45 l)
|
| Turning Radius | 21 ft (6 m)
|
Transmission
| Differential lock | F: Open / R: Open
|
| Max Speed - Forward | 24 mph (38 kph)
|
| Max Speed - Reverse | 16 mph (26 kph)
|
| Number of Forward Gears | 4
|
| Number of Reverse Gears | 3
|
| Transmission Type | Powershift
|
Weights
| Operating Weight | 53,791 lbs (24,399 kg)
|