Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 50,275.00 lbs (22,804.38 kg) |
| Bucket Capacity - heaped | 4.80 cu yd (3.67 cu m) |
| Bucket Capacity - struck | 3.90 cu yd (2.98 cu m) |
| Bucket Width | 10.10 ft (3.08 m) |
| Dump Clearance at Max Raise | 10.40 ft (3.17 m) |
| Ground Clearance | 1.50 ft (0.46 m) |
| Height - Top of Cab | 11.80 ft (3.60 m) |
| Hinge Pin - Max Height | 14.10 ft (4.30 m) |
| Length with Bucket on Ground | 28.10 ft (8.56 m) |
| Reach at Max Lift and Dump | 3.70 ft (1.13 m) |
| Wheelbase | 11.20 ft (3.41 m) |
| Width Over Tires | 9.70 ft (2.96 m) |
| Aspiration | turbocharged and air to air cooled |
| Displacement | 661.00 cu in (10,831.87 cu cm) |
| Engine Model | QSMII |
| Gross Power | 270.00 hp (201.34 kw) |
| Net Power | 248.00 hp (184.94 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1300 rpm |
| Torque Rise | 41% |
| Dump Time | 1.5 seconds |
| Lower Time | 4.9 seconds |
| Pump Flow Capacity | 38.00 gpm (143.83 lpm) |
| Pump Type | dual vane-type tandem |
| Raise Time | 6.2 seconds |
| Relief Valve Setting | 2850 psi |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 12.50 gal (47.31 l) |
| Engine Oil Fluid Capacity | 9.80 gal (37.09 l) |
| Front Axle/Diff Fluid Capacity | 16.90 gal (63.97 l) |
| Fuel Capacity | 104.10 gal (394.02 l) |
| Hydraulic System Fluid Capacity | 61.50 gal (232.78 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 50,621.00 lbs (22,961.33 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 16.90 gal (63.97 l) |
| Static Tipping Weight | 43,305.50 lbs (19,643.07 kg) |
| Tire Size | 26.5x25 L3 |
| Transmission Fluid Capacity | 7.60 gal (28.77 l) |
| Turning Radius | 20.20 ft (6.16 m) |
| Max Speed - Forward | 24.10 mph (38.79 kph) |
| Max Speed - Reverse | 16.60 mph (26.72 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |