- Category: Wheel Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 930K ➔
The Caterpillar 930K is a wheel loader designed for material handling, loading, stockpiling, and general construction applications. It is part of Caterpillar's K Series and is commonly used in aggregate yards, roadwork, agriculture, and industrial sites. The 930K features a hydrostatic transmission, articulated steering, and a front-end loader configuration for efficient maneuverability and cycle performance. Typical uses include moving soil, gravel, sand, and other bulk materials. The machine is known for its operator-focused cab, visibility, and compatibility with a range of buckets and attachments. The Caterpillar 930K is a mid-size wheel loader built for versatile jobsite productivity.
Bucket
| Bucket Capacities | 7 cu yd (5 cu m)
|
| Dump Clearance at Max Raise | 9 ft (3 m)
|
Cab
| FOPS | SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
|
| ROPS | SAE J1040 MAY94 ISO 3471-1994
|
Dimensions
| Bucket Pin Height - Maximum Lift | 13 ft (4 m)
|
| Carry Height | 2 ft (0 m)
|
| Centerline of Front Axle to Hitch | 5 ft (1 m)
|
| Digging Depth | 4 in (10 cm)
|
| Dump Angle at Maximum Lift | 49 degrees
|
| Dump Clearance at Maximum Lift - 45 degrees | 9 ft (3 m)
|
| Height - Center of Axle | 2 ft (1 m)
|
| Height - Top of ROPS/FOPS | 11 ft (3 m)
|
| Length - Rear Axle to Bumper | 7 ft (2 m)
|
| Overall Height - Bucket Raised | 17 ft (5 m)
|
| Overall Length | 25 ft (8 m)
|
| Rack Back Angle - Carry | 45 degrees
|
| Rack Back Angle - Maximum Lift | 54 degrees
|
| Reach at Maximum Lift and 45 degrees Dump | 3 ft (1 m)
|
| Wheel Base | 10 ft (3 m)
|
Engine
| Bore | 4 in (10 cm)
|
| Displacement | 402 cu in (6,588 cu cm)
|
| EEC 80/1269 | 156 hp (116 kw)
|
| Engine Model | C7.1 ACERT
|
| Gross Power | 154 hp (115 kw)
|
| Net Power | 152 hp (113 kw)
|
| Net Torque | 551 lbs ft (747 nm)
|
| Number of Cylinders | 6
|
| Rated Net Power | 154 hp (115 kw)
|
| Stroke | 5 in (13 cm)
|
Hydraulic System
| Dump Time | 1.7 seconds
|
| Lower Time | 2.7 seconds
|
| Pump Flow Capacity | 50 gpm (189 lpm)
|
| Raise Time | 5.7 seconds
|
| Relief Valve Setting | 3626 psi
|
Loader Hydraulic System
| Bore (1) | 5 in (12 cm)
|
| Bore (2) | 6 in (15 cm)
|
| Dump | 1.5 seconds
|
| Hydraulic Cycle Time | 9.3 seconds
|
| Lower, Empty, Float Down | 2.7 seconds
|
| Pump Flow - Implement Pump | 50 gpm (189 lpm)
|
| Raise | 5.1 seconds
|
| Stroke (1) | 29 in (73 cm)
|
| Stroke (2) | 22 in (56 cm)
|
| Total | 9.3 seconds
|
Operating Specifications
| Articulation Angle | 40 degrees
|
| Cooling System Fluid Capacity | 9 gal (32 l)
|
| Dump Clearance at Full Lift and 45 degrees Dump Angle | 9 ft (3 m)
|
| Front Axle/Diff Fluid Capacity | 7 gal (26 l)
|
| Fuel Capacity | 52 gal (195 l)
|
| Hydraulic System Fluid Capacity | 44 gal (165 l)
|
| Operating Weight | 28,948 lbs (13,131 kg)
|
| Rated Bucket Capacity | 2.7-7 cu yd (2-5 cu m) |
| Reach - Full Lift and 45 degrees Dump | 3 ft (1 m)
|
| Rear Axle/Diff Fluid Capacity | 7 gal (26 l)
|
| Static Tipping Load - Full Turn | 18,444 lbs (8,366 kg)
|
| Tire Size | 20.5
|
| Transmission Fluid Capacity | 2 gal (8 l)
|
Service Refill Capacities
| Cooling System | 8 gal (30 l)
|
| Crankcase | 5 gal (20 l)
|
| Front | 7 gal (26 l)
|
| Fuel Tank | 52 gal (195 l)
|
| Hydraulic Tank | 24 gal (90 l)
|
| Rear | 7 gal (25 l)
|
| Transmission | 2 gal (8 l)
|
Steering System
| Maximum Working Pressure | 3500 psi
|
| Steering Angle - Each Direction | 40 degrees
|
| Steering Articulation | 40 degrees
|
| Steering Cylinder, Two, Bore | 3 in (7 cm)
|
Tires
| Size | 20.5 R25 radial (L-3)
|
Transmission
| 2 Forward | 8 mph (13 kph)
|
| 3 Forward | 17 mph (27 kph)
|
| 4 Forward | 25 mph (40 kph)
|
| Forward - 1 | 8 mph (13 kph)
|
| Max Speed - Forward | 25 mph (40 kph)
|
| Max Speed - Reverse | 25 mph (40 kph)
|
| Number of Forward Gears | 4
|
| Number of Reverse Gears | 4
|
| Reverse - 1 | 8 mph (13 kph)
|
Weights
| Operating Weight | 30,479 lbs (13,825 kg)
|