Categories ↠ Wheel Loaders ↠ Caterpillar 992K

Caterpillar 992K Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 992K ➔

The Caterpillar 992K Wheel Loader is a powerful and efficient machine designed for heavy-duty construction and earthmoving tasks. With a bucket breakout force of 128,895 lbs and a bucket capacity of 16 cu yd, this machine is capable of handling large loads with ease. Equipped with a Cat C32 engine delivering gross power of 900 hp, the 992K ensures reliable performance in even the toughest job sites. Meeting safety standards with its ROPS/FOPS cab design and hydraulic system specifications, this wheel loader is a top choice for productivity and operator comfort.

See all Caterpillar 992Ks for sale

General Specifications

Bucket Capacity	9.7 - 19.5 (7.4 - 14.9) Starting 2021 Model Year
Bucket Capacity cu. yd. (cu m)	14.0 - 16.0 (10.7 - 12.2) Starting 2016 Model Year
Engine Power	814 (307) Starting 2019 Model Year
Engine Power hp (kw)	814 (307) Starting 2016 Model Year
Engine type	Cat C32 Starting 2021 Model Year
Max Dump Height	14.8 (4.5) Starting 2019 Model Year
Max Dump Height ft.( m)	7.8 (2.4) Starting 2016 Model Year
Operating Weight	220,089 (99,831) Starting 2019 Model Year
Operating Weight lbs (kg)	220,089 (99,831) Starting 2016 Model Year
Tip Load	136,365 61,854) Starting 2021 Model Year
Travel Speed(Fwd/Rev)	14.2 / 15.4 mph Starting 2021 Model Year

Axles

Front	Fixed
Oscillation Angle	10 8 with Stops - DEGREES
Rear	Oscillating

Brakes

Meets SAE J1473 OCT90 and ISO 3450:1992

Bucket

Breakout Force	128,895 lbs (58,466 kg)
Bucket Capacities	16 cu yd (12 cu m)
Bucket Capacity - heaped	16 cu yd (12 cu m)
Bucket Capacity - struck	14 cu yd (11 cu m)
Bucket Width	16 ft (5 m)

Cab

Cab - ROPS/FOPS	Meets SAE and ISO standards.
ROPS/FOPS	Meets SAE and ISO standards

Dimensions

Ground Clearance	2 ft (1 m)
Height - Top of Cab	19 ft (6 m)
Length with Bucket on Ground	52 ft (16 m)
Reach at Max Lift and Dump	8 ft (2 m)
Wheel Base Length	19 ft (6 m)
Wheelbase	19 ft (6 m)
Width Over Tires	18 ft (6 m)

Engine

Bore	6 in (14 cm)
Displacement	9 cu in (139 cu cm)
Emissions	U.S. EPA Tier 4 Final
Engine Model	Cat C32 with ACERT Technology
Gross Power	900 hp (671 kw)
Gross Power - SAE J1995	904 hp (674 kw)
Make	Cat
Net Power	814 hp (607 kw)
Number of Cylinders	12
Power Measured @	1750 rpm
Stroke	6 in (16 cm)

Hydraulic Cycle Times

Dump	1.8 seconds
Lower Float Down	3.7 seconds
Rack Back	4.4 seconds
Raise	9.4 seconds
Total Hydraulic Cycle Time	14.9 seconds

Hydraulic System

Relief Valve Setting

4500 psi

Hydraulic System - Lift/Tilt

Lift Cylinder - Bore	11 in (28 cm)
Lift Cylinder - Stroke	45 in (115 cm)
Lift/Tilt System - Circuit	Positive Flow Control
Lift/Tilt System - Pump	Variable Displacement Piston
Relief Valve Setting - Lift/Tilt	4500 psi
Tilt Cylinder - Bore	11 in (27 cm)
Tilt Cylinder - Stroke	81 in (205 cm)

Hydraulic System - Steering

Steering Cut Off Pressure	4500 psi
Steering Cycle Times - High Idle	4.4 seconds
Steering Cycle Times - Low Idle	6.4 seconds
Steering System - Circuit	Pilot Load Sensing
Steering System - Pump	Piston Variable Displacement

Loader Hydraulic System

Lift Cylinder, Double Acting - Stroke	45 in (115 cm)
Relief Valve Setting	4500 psi
Relief Valve Setting - Low Idle	4500 psi
Tilt Cylinder, Double Acting - Stroke	81 in (205 cm)

Operating Specifications

Alternator Supplied Amperage	150 amps
Breakout Force	128,895 lbs (58,466 kg)
Bucket Capacity Range	14 - 16 yd
Cooling System Fluid Capacity	77 gal (291 l)
Engine Oil Fluid Capacity	32 gal (121 l)
Front Axle/Diff Fluid Capacity	95 gal (360 l)
Fuel Capacity	413 gal (1,563 l)
Operating Voltage	24 volts
Operating Weight	214,948 lbs (97,499 kg)
Rated Bucket Capacity	14-16 cu yd (11-12 cu m)
Rated Payload - High Lift	42,000 lbs (19,051 kg)
Rear Axle/Diff Fluid Capacity	91 gal (344 l)
Static Tipping Weight	113,450 lbs (51,460 kg)
Tire Size	45/65 45
Transmission Fluid Capacity	45 gal (170 l)

Service Refill Capacities

Cooling System	77 gal (291 l)
Cooling Systems	77 gal (291 l)
Crankcase	32 gal (121 l)
Differential - Final Drives - Front	95 gal (360 l)
Differential - Final Drives - Rear	91 gal (344 l)
Engine Crankcase	32 gal (121 l)
Fuel Tank	413 gal (1,563 l)
Fuel Tank - Standard	413 gal (1,563 l)
Transmission	45 gal (170 l)

Tires

Choose from a variety of tires to match your application.

Transmission

Converter Drive - Forward 1	4 mph (7 kph)
Converter Drive - Forward 2	8 mph (12 kph)
Converter Drive - Forward 3	13 mph (21 kph)
Converter Drive - Reverse 1	5 mph (7 kph)
Converter Drive - Reverse 2	8 mph (13 kph)
Converter Drive - Reverse 3	14 mph (22 kph)
Direct Drive - Forward 1	Lock-up Disabled
Direct Drive - Forward 2	8 mph (13 kph)
Direct Drive - Forward 3	14 mph (23 kph)
Direct Drive - Reverse 1	5 mph (8 kph)
Direct Drive - Reverse 2	9 mph (14 kph)
Direct Drive - Reverse 3	15 mph (25 kph)
Forward - 1	4 mph (7 kph)
Forward - 2	7 mph (12 kph)
Forward - 3	13 mph (20 kph)
Max Speed - Forward	13 mph (21 kph)
Max Speed - Reverse	14 mph (22 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Reverse - 1	5 mph (8 kph)
Reverse - 2	8 mph (13 kph)
Reverse - 3	14 mph (22 kph)
Transmission Type	Planetary powershift

Caterpillar 992Ks currently for sale

A Caterpillar 992K From Bergerat Monnoyeur for $850,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon