Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 4,631,064 lbs (2,100,618 kg) |
| Bucket Capacity - heaped | 6 cu yd (5 cu m) |
| Bucket Capacity - struck | 5 cu yd (4 cu m) |
| Bucket Width | 10 ft (3 m) |
| Ground Clearance | 2 ft (1 m) |
| Height - Top of Cab | 12 ft (4 m) |
| Hinge Pin - Max Height | 15 ft (4 m) |
| Length with Bucket on Ground | 29 ft (9 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
| Aspiration | turbocharged aftercooled |
| Displacement | 659 cu in (10,801 cu cm) |
| Engine Model | QSM11 |
| Net Power | 275 hp (205 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1200 rpm |
| Dump Time | 1.4 seconds |
| Lower Time | 3.8 seconds |
| Pump Flow Capacity | 103 gpm (388 lpm) |
| Pump Type | Sealed system with anticavitation and relief valves |
| Raise Time | 6.2 seconds |
| Relief Valve Setting | 3045.8 psi |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 20 gal (77 l) |
| Engine Oil Fluid Capacity | 9 gal (34 l) |
| Front Axle/Diff Fluid Capacity | 13 gal (48 l) |
| Fuel Capacity | 96 gal (364 l) |
| Hydraulic System Fluid Capacity | 38 gal (144 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 52,161 lbs (23,660 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 13 gal (48 l) |
| Static Tipping Weight | 42,660 lbs (19,350 kg) |
| Tire Size | 26.5-25 XHA |
| Transmission Fluid Capacity | 9 gal (35 l) |
| Turning Radius | 23 ft (7 m) |
| Max Speed - Forward | 23 mph (37 kph) |
| Max Speed - Reverse | 25 mph (40 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Transmission Type | Power-Shift Countershaft |