- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L120H ➔
The Volvo L120H is a medium-size wheel loader designed for material handling, loading, stockpiling, and general construction applications. It is part of Volvo Construction Equipment's H-series and is commonly used in aggregates, waste handling, quarry, and industrial operations. The L120H features a fuel-efficient Volvo engine, load-sensing hydraulics, and a reinforced loader linkage for productive bucket work and attachment use. Operator comfort, visibility, and service access are key design elements. Typical configurations may include general-purpose, light material, and high-lift buckets, along with optional quick couplers and work tools. The model is known for balanced performance, durability, and versatility in demanding jobsite conditions.
General Specifications
| Bucket Capacity | 5.0 (3.8) Starting 2024 Model Year |
| Engine Power | 272 (203) Starting 2019 Model Year |
| Engine type | Volvo D8M Starting 2024 Model Year |
| Max Dump Height | 9.2 (2.7) Starting 2024 Model Year |
| Operating Weight | 44,820 (20,330) Starting 2024 Model Year |
Axles
| Axle oil front | 10 gal (36 l)
|
| Axle oil rear | 11 gal (41 l)
|
| Front | Volvo AWB 31
|
| Rear | Volvo AWB 30
|
| Rear axle oscillation | 13 degrees
|
Bucket
| Breakout Force | 41,365 lbs (18,763 kg)
|
Dimensions
| Ground Clearance | 2 ft (0 m)
|
| Height - Top of Cab | 11 ft (3 m)
|
| Hinge Pin - Max Height | 14 ft (4 m)
|
| Length with Bucket on Ground | 27 ft (8 m)
|
| Wheelbase | 11 ft (3 m)
|
| Width Over Tires | 9 ft (3 m)
|
Drive System
| Torque multiplication, stall ratio | 2.47:1
|
| Transmission | Volvo HTL 206C
|
| Transport speed, maximum | 25 mph (40 kph)
|
Electrical System
| Alternator rating | 2280/80 (W/A)
|
| Battery capacity | 2 x 170 Ah
|
| Cold cranking capacity | 1000 A
|
| Starter motor output | 7 hp (6 kw)
|
| Voltage | 24 V
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 476 cu in (7,800 cu cm)
|
| Engine Model | Volvo D8J
|
| Gross Power | 272 hp (203 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1500 rpm
|
| Torque Measured @ | 1450 rpm
|
Hydraulic cycle times (unloaded)
| Lift | 5.4 seconds
|
| Lower | 2.5 seconds
|
| Tilt | 2.1 seconds
|
| Total cycle time | 10 seconds
|
Hydraulic System
| Engine speed | 1900 rpm
|
| Working pressure | Pump 1 - 27 MPa Pump 2 - 29 MPa Pump 3 - 21 MPa
|
Operating Specifications
| Cooling System Fluid Capacity | 11 gal (43 l)
|
| DEF tank capacity | 7 gal (25 l)
|
| Engine Oil Fluid Capacity | 6 gal (22 l)
|
| Fuel Capacity | 71 gal (270 l)
|
| Hydraulic System Fluid Capacity | 35 gal (133 l)
|
| Transmission Fluid Capacity | 10 gal (38 l)
|
Steering System
| Articulation angle | 40 degrees
|
| Cylinder bore | 3 in (8 cm)
|
| Maximum flow | 32 gpm (120 lpm)
|
| Rod diameter | 2 in (5 cm)
|
| Steering cylinders | 2
|
| Stroke | 2 ft (0 m)
|
| Working pressure | 21 MPa 210 bar
|
Weights
| Operating Weight | 42,830 lbs (19,427 kg)
|