- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L150H ➔
The Volvo L150H is a wheel loader designed for material handling, aggregate, construction, and quarry applications. It is part of Volvo Construction Equipment's H-series and is built for loading, stockpiling, truck loading, and general earthmoving tasks. The L150H typically features a fuel-efficient Volvo engine, load-sensing hydraulics, automatic transmission, and a reinforced loader frame for demanding work cycles. Operator comfort, visibility, and service access are key design elements. The model is commonly used with general-purpose, rock, and high-capacity buckets, as well as forks and other attachments. The Volvo L150H is recognized for productivity, durability, and application versatility.
General Specifications
| Bucket Capacity | 6.3 (4.8) Starting 2024 Model Year |
| Engine Power | 295 (220) Starting 2019 Model Year |
| Engine type | Volvo D13J (Tier 4F) Starting 2024 Model Year |
| Max Dump Height | 9.6 (2.9) Starting 2024 Model Year |
| Operating Weight | 56,320 (25,546) Starting 2024 Model Year |
Axles
| Axle oil front | 12 gal (46 l)
|
| Axle oil rear | 15 gal (55 l)
|
| Front | Volvo AWB 40B
|
| Rear | Volvo AWB 40C
|
| Rear axle oscillation | 15 degrees
|
Bucket
| Breakout Force | 53,077 lbs (24,076 kg)
|
| Dump Clearance at Max Raise | 10 ft (3 m)
|
Dimensions
| Ground Clearance | 2 ft (1 m)
|
| Height - Top of Cab | 12 ft (4 m)
|
| Hinge Pin - Max Height | 14 ft (4 m)
|
| Length with Bucket on Ground | 29 ft (9 m)
|
| Wheelbase | 12 ft (4 m)
|
| Width Over Tires | 10 ft (3 m)
|
Drive System
| Torque multiplication, stall ratio | 2.09:1
|
| Transmission | Volvo HTL 223
|
| Transport speed, maximum | 24 mph (38 kph)
|
Electrical System
| Alternator rating | 2280/80 (W/A)
|
| Battery capacity | 2 x 170 Ah
|
| Cold cranking capacity | 1000 A
|
| Starter motor output | 9 hp (7 kw)
|
| Voltage | 24 V
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 781 cu in (12,802 cu cm)
|
| Engine Model | Volvo D13J
|
| Gross Power | 295 hp (220 kw)
|
| Make | Volvo
|
| Net Power | 295 hp (220 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1300 rpm
|
| Torque Measured @ | 1000 rpm
|
Hydraulic cycle times (unloaded)
| Lift | 5.9 seconds
|
| Lower | 3.7 seconds
|
| Tilt | 2 seconds
|
| Total cycle time | 11.6 seconds
|
Hydraulic System
| Engine speed | 1900 rpm
|
| Working pressure | Pump 1 - 29 MPa Pump 2 - 31 MPa Pump 3 - 25 MPa
|
Operating Specifications
| Cooling System Fluid Capacity | 15 gal (55 l)
|
| DEF tank capacity | 8 gal (31 l)
|
| Engine Oil Fluid Capacity | 13 gal (50 l)
|
| Fuel Capacity | 97 gal (366 l)
|
| Hydraulic System Fluid Capacity | 41 gal (156 l)
|
| Rated Bucket Capacity | 4-16 cu yd (3-12 cu m) |
| Transmission Fluid Capacity | 13 gal (48 l)
|
Steering System
| Articulation angle | 37 degrees
|
| Cylinder bore | 4 in (10 cm)
|
| Maximum flow | 53 gpm (202 lpm)
|
| Rod diameter | 2 in (6 cm)
|
| Steering cylinders | 2
|
| Stroke | 1 ft (0 m)
|
| Working pressure | 21 MPa 210 bar
|
Weights
| Operating Weight | 46000-52,000 lbs (20,865-23,587 kg) |