- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L60H ➔
The Volvo L60H is a medium-size wheel loader designed for material handling, loading, and general construction applications. It is part of Volvo Construction Equipment's H-series and is commonly used in aggregate yards, roadwork, agriculture, waste handling, and industrial sites. The L60H features a fuel-efficient Volvo engine, load-sensing hydraulics, and a Z-bar linkage for strong breakout force and fast cycle times. Operator comfort, visibility, and service access are key design elements. The machine is available with a range of bucket and attachment options, making it suitable for versatile loading tasks in demanding work environments.
General Specifications
| Bucket Capacity | 2.7 (2.1) Starting 2024 Model Year |
| Engine Power | 167 (124) Starting 2021 Model Year |
| Engine type | Volvo D6J Starting 2019 Model Year |
| Max Dump Height | 9.3 (2.8) Starting 2024 Model Year |
| Operating Weight | 29,983 (13,600) Starting 2024 Model Year |
Axles
| Axle oil front | 7 gal (25 l)
|
| Axle oil rear | 7 gal (25 l)
|
| Front | Volvo AWB 15
|
| Rear | Volvo AWB 15
|
| Rear axle oscillation | 13 degrees
|
Bucket
| Breakout Force | 18,389 lbs (8,341 kg)
|
| Dump Clearance at Max Raise | 9 ft (3 m)
|
Dimensions
| Ground Clearance | 2 ft (0 m)
|
| Height - Top of Cab | 11 ft (3 m)
|
| Hinge Pin - Max Height | 13 ft (4 m)
|
| Length with Bucket on Ground | 24 ft (7 m)
|
| Wheelbase | 10 ft (3 m)
|
| Width Over Tires | 8 ft (2 m)
|
Drive System
| Torque multiplication, stall ratio | 2.5:1
|
| Transmission | Volvo HTE 125C
|
| Transport speed, maximum | 29 mph (46 kph)
|
Electrical System
| Alternator rating | 3135/80 (W/A)
|
| Battery capacity | 2 x 110 Ah
|
| Cold cranking capacity | 1000 A
|
| Starter motor output | 7 hp (6 kw)
|
| Voltage | 24 V
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 348 cu in (5,701 cu cm)
|
| Engine Model | Volvo D6J
|
| Gross Power | 164 hp (122 kw)
|
| Net Power | 164 hp (122 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1800 rpm
|
| Torque Measured @ | 1400 rpm
|
Hydraulic cycle times (unloaded)
| Lift | 4.5 seconds
|
| Lower | 2.9 seconds
|
| Tilt | 2.3 seconds
|
| Total cycle time | 9.7 seconds
|
Hydraulic System
| Engine speed | 1900 rpm
|
| Working pressure | Pump 2 - 26 MPa Pump 3 - 21 MPa
|
Operating Specifications
| Cooling System Fluid Capacity | 8 gal (30 l)
|
| DEF tank capacity | 5 gal (20 l)
|
| Engine Oil Fluid Capacity | 5 gal (20 l)
|
| Fuel Capacity | 59 gal (222 l)
|
| Hydraulic System Fluid Capacity | 24 gal (90 l)
|
| Rated Bucket Capacity | 2.1-7 cu yd (2-5 cu m) |
| Transmission Fluid Capacity | 6 gal (22 l)
|
Steering System
| Articulation angle | 40 degrees
|
| Cylinder bore | 3 in (7 cm)
|
| Maximum flow | 16 gpm (60 lpm)
|
| Rod diameter | 2 in (5 cm)
|
| Steering cylinders | 2
|
| Stroke | 1 ft (0 m)
|
| Working pressure | 21 MPa 210 bar
|
Weights
| Operating Weight | 26,800 lbs (12,156 kg)
|