- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L90H ➔
The Volvo L90H is a medium-size wheel loader designed for material handling, loading, stockpiling, and general construction work. It is part of Volvo Construction Equipment's H-series and is commonly used in aggregate yards, roadbuilding, waste handling, and site preparation. The L90H features a fuel-efficient Volvo engine, load-sensing hydraulics, and an operator cab designed for visibility and control. Available with a range of buckets and attachments, it is suited to applications requiring cycle efficiency and maneuverability. The machine is known for its articulated steering, robust drivetrain, and compatibility with Volvo's integrated service and telematics systems.
General Specifications
| Bucket Capacity | 3.7 (2.8) Starting 2024 Model Year |
| Engine Power | 186 (139) Starting 2021 Model Year |
| Engine type | Volvo D6J Starting 2019 Model Year |
| Max Dump Height | 9.6 (2.9) Starting 2024 Model Year |
| Operating Weight | 34,350 (15,580) Starting 2024 Model Year |
Axles
| Axle oil front | 9 gal (35 l)
|
| Axle oil rear | 7 gal (27 l)
|
| Front | Volvo AWB 25
|
| Rear | Volvo AWB 20
|
| Rear axle oscillation | 13 degrees
|
Bucket
| Breakout Force | 31,204 lbs (14,154 kg)
|
| Dump Clearance at Max Raise | 10 ft (3 m)
|
Dimensions
| Ground Clearance | 2 ft (0 m)
|
| Height - Top of Cab | 11 ft (3 m)
|
| Hinge Pin - Max Height | 13 ft (4 m)
|
| Length with Bucket on Ground | 25 ft (8 m)
|
| Wheelbase | 10 ft (3 m)
|
| Width Over Tires | 8 ft (2 m)
|
Drive System
| Torque multiplication, stall ratio | 2.5:1 Non Lock-up / 2.59:1 Lock-up
|
| Transmission | Volvo HTE 125C Non Lock-up / HTE 125 Lock-up
|
| Transport speed, maximum | 29 mph (46 kph)
|
Electrical System
| Alternator rating | 3135/80 (W/A)
|
| Battery capacity | 2 x 110 Ah
|
| Cold cranking capacity | 1000 A
|
| Starter motor output | 7 hp (6 kw)
|
| Voltage | 24 V
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 348 cu in (5,701 cu cm)
|
| Engine Model | Volvo D6J
|
| Gross Power | 184 hp (137 kw)
|
| Net Power | 184 hp (137 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 1900 rpm
|
| Torque Measured @ | 1400 rpm
|
Hydraulic cycle times (unloaded)
| Lift | 5.4 seconds
|
| Lower | 3.2 seconds
|
| Tilt | 1.9 seconds
|
| Total cycle time | 10.5 seconds
|
Hydraulic System
| Engine speed | 1900 rpm
|
| Working pressure | Pump 2 - 31 MPa Pump 3 - 21 MPa
|
Operating Specifications
| Cooling System Fluid Capacity | 8 gal (30 l)
|
| DEF tank capacity | 5 gal (20 l)
|
| Engine Oil Fluid Capacity | 5 gal (20 l)
|
| Fuel Capacity | 59 gal (222 l)
|
| Hydraulic System Fluid Capacity | 24 gal (90 l)
|
| Rated Bucket Capacity | 2.9-9 cu yd (2-7 cu m) |
| Transmission Fluid Capacity | 6 gal (22 l)
|
Steering System
| Articulation angle | 40 degrees
|
| Cylinder bore | 3 in (8 cm)
|
| Maximum flow | 16 gpm (60 lpm)
|
| Rod diameter | 2 in (5 cm)
|
| Steering cylinders | 2
|
| Stroke | 1 ft (0 m)
|
| Working pressure | 21 MPa 210 bar
|
Weights
| Operating Weight | 32,220 lbs (14,615 kg)
|