Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 8,880.00 lbs (4,027.91 kg) |
| Bucket Capacity - heaped | 1.10 cu yd (0.84 cu m) |
| Bucket Width | 5.80 ft (1.77 m) |
| Dump Clearance at Max Raise | 8.20 ft (2.50 m) |
| Ground Clearance | 1.50 ft (0.46 m) |
| Height - Top of Cab | 8.70 ft (2.65 m) |
| Hinge Pin - Max Height | 10.50 ft (3.20 m) |
| Length with Bucket on Ground | 16.70 ft (5.09 m) |
| Reach at Max Lift and Dump | 2.60 ft (0.79 m) |
| Wheelbase | 6.70 ft (2.04 m) |
| Width Over Tires | 5.70 ft (1.74 m) |
| Aspiration | turbocharged |
| Displacement | 166.60 cu in (2,730.09 cu cm) |
| Engine Model | KHD BF4 L 1011FT |
| Gross Power | 60.00 hp (44.74 kw) |
| Net Power | 57.00 hp (42.51 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2300 rpm |
| Torque Measured @ | 1800 rpm |
| Dump Time | 1.5 seconds |
| Lower Time | 3.5 seconds |
| Pump Flow Capacity | 13.80 gpm (52.23 lpm) |
| Pump Type | gear type |
| Raise Time | 6 seconds |
| Relief Valve Setting | 3190 psi |
| Alternator Supplied Amperage | 60 amps |
| Engine Oil Fluid Capacity | 2.80 gal (10.60 l) |
| Front Axle/Diff Fluid Capacity | 2.70 gal (10.22 l) |
| Fuel Capacity | 15.90 gal (60.18 l) |
| Hydraulic System Fluid Capacity | 15.90 gal (60.18 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 11,020.00 lbs (4,998.59 kg) |
| Rear Axle Oscillation | 20 degrees |
| Rear Axle/Diff Fluid Capacity | 3.00 gal (11.36 l) |
| Static Tipping Weight | 7,495.80 lbs (3,400.04 kg) |
| Tire Size | 12.5-20 |
| Max Speed - Forward | 18.60 mph (29.93 kph) |
| Max Speed - Reverse | 18.60 mph (29.93 kph) |
| Number of Forward Gears | 2 |
| Number of Reverse Gears | 2 |
| Transmission Type | Hydrostatic Transmission |