Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 14,163.00 lbs (6,424.24 kg) |
| Bucket Capacity - heaped | 1.40 cu yd (1.07 cu m) |
| Bucket Width | 6.80 ft (2.07 m) |
| Dump Clearance at Max Raise | 9.00 ft (2.74 m) |
| Ground Clearance | 1.90 ft (0.58 m) |
| Height - Top of Cab | 9.40 ft (2.87 m) |
| Hinge Pin - Max Height | 11.40 ft (3.47 m) |
| Length with Bucket on Ground | 18.00 ft (5.49 m) |
| Reach at Max Lift and Dump | 2.60 ft (0.79 m) |
| Wheelbase | 7.40 ft (2.26 m) |
| Width Over Tires | 6.60 ft (2.01 m) |
| Aspiration | turbo + water cooled |
| Displacement | 195.30 cu in (3,200.40 cu cm) |
| Engine Model | KHD BF 4M 1012 E |
| Gross Power | 83.00 hp (61.89 kw) |
| Net Power | 80.00 hp (59.66 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2300 rpm |
| Torque Measured @ | 1500 rpm |
| Dump Time | 2 seconds |
| Lower Time | 5.5 seconds |
| Pump Flow Capacity | 23.80 gpm (90.08 lpm) |
| Pump Type | gear type |
| Raise Time | 6 seconds |
| Relief Valve Setting | 3045 psi |
| Alternator Supplied Amperage | 55 amps |
| Engine Oil Fluid Capacity | 2.40 gal (9.08 l) |
| Front Axle/Diff Fluid Capacity | 2.30 gal (8.71 l) |
| Fuel Capacity | 26.50 gal (100.30 l) |
| Hydraulic System Fluid Capacity | 29.10 gal (110.14 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 15,873.30 lbs (7,200.02 kg) |
| Rear Axle Oscillation | 20 degrees |
| Rear Axle/Diff Fluid Capacity | 3.10 gal (11.73 l) |
| Static Tipping Weight | 9,634.30 lbs (4,370.05 kg) |
| Tire Size | 15.5-25 |
| Turning Radius | 14.70 ft (4.48 m) |
| Max Speed - Forward | 21.80 mph (35.08 kph) |
| Max Speed - Reverse | 9.10 mph (14.64 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 2 |
| Transmission Type | hydrostatic full power shift |