CEAttachment Inc.’s Edge post pounder and puller is a useful attachment for quick and cost effective installation and removal of property line fences with solid steel or wood posts, and particularly in agricultural applications.

This one-person operation will drive fence posts as wide as 10 in. (25 cm) and up to 10 ft. (3 m) long into the ground in minutes with its 50,000 lb. impact force. Use the attachment to pick up the post, position it using the 12 in. (30.5 cm) plumb chain, and use the power of the skid steer to drive it into the ground, even as low as 18 in. (45.7 cm) above ground.

The Edge post pounder and puller also will pull old fence, small trees or steel posts 1 in. (2.5 cm) in diameter out of the ground with ease. An optional T-Post adapter kit is a simple accessory to assist in driving or pulling T-Posts.

The Edge post pounder and puller requires a minimum of 15 gpm (56.7 Lpm) hydraulic flow and is recommended for use on a skid steer with a minimum lift capacity of 1,650 lbs. (748 kg).

For more information, call 866/232-8224 or visit www.ceattachments.com.