- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L50H ➔
The Volvo L50H is a compact wheel loader designed for material handling, loading, and site support applications. It is part of Volvo Construction Equipment's H-series wheel loader lineup and is commonly used in construction, agriculture, landscaping, and municipal work. The L50H features articulated steering, a hydraulic loader arm, and a cab designed for operator visibility and control. Typical uses include stockpile work, truck loading, and general earthmoving. The model is known for its balanced size, maneuverability, and compatibility with a range of buckets and attachments. It is classified as a wheel loader in the mid-size compact equipment category.
General Specifications
| Bucket Capacity | 2.1 (1.6) Starting 2024 Model Year |
| Engine Power | 117 (87) Starting 2024 Model Year |
| Engine type | Volvo D4J Starting 2019 Model Year |
| Max Dump Height | 9.3 (2.8) Starting 2019 Model Year |
| Operating Weight | 20,900 (9,480) Starting 2020 Model Year |
Axles
| Axle oil front | 5 gal (18 l)
|
| Axle oil rear | 5 gal (18 l)
|
| Rear axle oscillation | 12 degrees
|
Bucket
| Breakout Force | 16,186 lbs (7,342 kg)
|
| Dump Clearance at Max Raise | 9 ft (3 m)
|
Dimensions
| Ground Clearance | 2 ft (0 m)
|
| Height - Top of Cab | 10 ft (3 m)
|
| Hinge Pin - Max Height | 13 ft (4 m)
|
| Length with Bucket on Ground | 21 ft (6 m)
|
| Wheelbase | 9 ft (3 m)
|
| Width Over Tires | 7 ft (2 m)
|
Drive System
| Transport speed, maximum | 19 mph (30 kph)
|
Electrical System
| Alternator rating | 3080/110 (W/A)
|
| Battery capacity | 2 x 100 Ah
|
| Cold cranking capacity | 830 A
|
| Starter motor output | 7 hp (6 kw)
|
| Voltage | 24 V
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 244 cu in (4,000 cu cm)
|
| Engine Model | Volvo D4J
|
| Gross Power | 117 hp (87 kw)
|
| Make | Volvo
|
| Net Power | 114 hp (85 kw)
|
| Number of Cylinders | 4
|
| Power Measured @ | 2200 rpm
|
| Torque Measured @ | 1450 rpm
|
Hydraulic cycle times (unloaded)
| Dump time | 1.2 seconds
|
| Lift | 4.7 seconds
|
| Lower | 3.9 seconds
|
Hydraulic System
| Engine speed | 2200 rpm
|
| Pump Flow Capacity | 42 gpm (158 lpm)
|
| Working pressure | 26 MPa 3771 psi
|
Operating Specifications
| Cooling System Fluid Capacity | 5 gal (20 l)
|
| DEF tank capacity | 5 gal (20 l)
|
| Engine Oil Fluid Capacity | 4 gal (14 l)
|
| Fuel Capacity | 40 gal (150 l)
|
| Hydraulic System Fluid Capacity | 25 gal (95 l)
|
| Rated Bucket Capacity | 2.0-3 cu yd (2-2 cu m) |
| Transmission Fluid Capacity | 0 gal (2 l)
|
Steering System
| Articulation angle | 40 degrees
|
| Maximum flow | 19 gpm (70 lpm)
|
| Steering cylinders | 2
|
| Working pressure | 17.5 MPa 2538 psi
|
Weights
| Operating Weight | 20,900 lbs (9,480 kg)
|